Concourse is a container-based continuous thing-doer written in Go and Elm.

Overview

Concourse: the continuous thing-doer.

Discord Build Contributors Help Wanted

Concourse is an automation system written in Go. It is most commonly used for CI/CD, and is built to scale to any kind of automation pipeline, from simple to complex.

booklit pipeline

Concourse is very opinionated about a few things: idempotency, immutability, declarative config, stateless workers, and reproducible builds.

The road to Concourse v10

Concourse v10 is the code name for a set of features which, when used in combination, will have a massive impact on Concourse's capabilities as a generic continuous thing-doer. These features, and how they interact, are described in detail in the Core roadmap: towards v10 and Re-inventing resource types blog posts. (These posts are slightly out of date, but they get the idea across.)

Notably, v10 will make Concourse not suck for multi-branch and/or pull-request driven workflows - examples of spatial change, where the set of things to automate grows and shrinks over time.

Because v10 is really an alias for a ton of separate features, there's a lot to keep track of - here's an overview:

Feature RFC Status
set_pipeline step #31 v5.8.0 (experimental), TODO: #5814
Var sources for creds #39 v5.8.0 (experimental), TODO: #5813
Archiving pipelines #33 v6.5.0
Instanced pipelines #34 v7.0.0 (experimental, not released yet)
Static across step 🚧 #29 v6.5.0 (experimental)
Dynamic across step 🚧 #29 🙏 RFC needs feedback!
Projects 🚧 #32 🙏 RFC needs feedback!
load_var step #27 v6.0.0 (experimental)
get_var step #27 🚧 #5815 in progress!
Prototypes #37 Pending first use of protocol (any of the below)
run step 🚧 #37 Pending its own RFC, but feel free to experiment
Resource prototypes #38 🙏 #5870 looking for volunteers!
Var source prototypes 🚧 #6275 planned, may lead to RFC
Notifier prototypes 🚧 #28 RFC not ready

The Concourse team at VMware will be working on these features, however in the interest of growing a healthy community of contributors we would really appreciate any volunteers. This roadmap is very easy to parallelize, as it is comprised of many orthogonal features, so the faster we can power through it, the faster we can all benefit. We want these for our own pipelines too! 😆

If you'd like to get involved, hop in Discord or leave a comment on any of the issues linked above so we can coordinate. We're more than happy to help figure things out or pick up any work that you don't feel comfortable doing (e.g. UI, unfamiliar parts, etc.).

Thanks to everyone who has contributed so far, whether in code or in the community, and thanks to everyone for their patience while we figure out how to support such common functionality the "Concoursey way!" 🙏

Installation

Concourse is distributed as a single concourse binary, available on the Releases page.

If you want to just kick the tires, jump ahead to the Quick Start.

In addition to the concourse binary, there are a few other supported formats. Consult their GitHub repos for more information:

Quick Start

$ wget https://concourse-ci.org/docker-compose.yml
$ docker-compose up
Creating docs_concourse-db_1 ... done
Creating docs_concourse_1    ... done

Concourse will be running at 127.0.0.1:8080. You can log in with the username/password as test/test.

Next, install fly by downloading it from the web UI and target your local Concourse as the test user:

$ fly -t ci login -c http://127.0.0.1:8080 -u test -p test
logging in to team 'main'

target saved

Configuring a Pipeline

There is no GUI for configuring Concourse. Instead, pipelines are configured as declarative YAML files:

resources:
- name: booklit
  type: git
  source: {uri: "https://github.com/vito/booklit"}

jobs:
- name: unit
  plan:
  - get: booklit
    trigger: true
  - task: test
    file: booklit/ci/test.yml

Most operations are done via the accompanying fly CLI. If you've got Concourse installed, try saving the above example as booklit.yml, target your Concourse instance, and then run:

fly -t ci set-pipeline -p booklit -c booklit.yml

These pipeline files are self-contained, maximizing portability from one Concourse instance to the next.

Learn More

Contributing

Our user base is basically everyone that develops software (and wants it to work).

It's a lot of work, and we need your help! If you're interested, check out our contributing docs.

Issues
  • Resources failing in Kubernetes with Google Container-Optimized OS after upgrade to 3.1.0

    Resources failing in Kubernetes with Google Container-Optimized OS after upgrade to 3.1.0

    Bug Report

    • Concourse version: 3.1.0
    • Deployment type (Docker):
    • Infrastructure/IaaS: Kubernetes

    After upgrade to 3.1.0 all git and time resources are failing checks with:

    runc create: exit status 1: container_linux.go:264: starting container process caused "process_linux.go:339: container init caused \"rootfs_linux.go:57: mounting \\\"/worker-state/3.1.0/assets/bin/init\\\" to rootfs \\\"/worker-state/volumes/live/26e7c69d-69fc-4f0f-507d-4b30c461a78f/volume\\\" at \\\"/worker-state/volumes/live/26e7c69d-69fc-4f0f-507d-4b30c461a78f/volume/tmp/garden-init\\\" caused \\\"open /worker-state/volumes/live/26e7c69d-69fc-4f0f-507d-4b30c461a78f/volume/tmp/garden-init: permission denied\\\"\""
    

    Other resources seems to check fine

    needs-investigation stack/docker stack/kubernetes ops/day1 
    opened by ese 70
  • Using external credential managers for build credentials

    Using external credential managers for build credentials

    Motivation

    There are so many credentials flowing through a Concourse server at the moment that it's keeping me up at night. Some of this risk can be mitigated by fetching the secrets as late as possible and using pipeline templates to insert them into the pipeline. This at least means that you'll never have the pipeline secrets stored on local workstations.

    This isn't good enough.

    Credentials are still stored in the Concourse database, aren't internally rotated, and do not have any audit trail as to which jobs and builds used them. Let's fix these things.

    Goals

    • Build credentials are never stored on a disk (apart from in Vault where they are stored encrypted).
    • Build credentials are never stored locally when setting the pipeline using fly.
    • An audit trail of which build used a secret and when it used it should be visible.

    Proposal

    I don't want to have to build a secret management system. This means that we're looking to use one of the existing ones. There are a few to choose from in this regard but I'd like to go forward by using Vault. Vault seems to strike the right balance of confidence in implementation, good technical decisions, and generically usable. I'm not ruling out the ability to use a different secret store in the future. In fact, a good implementation of this proposal would allow pluggable secret stores with minimal effort.

    So, what would this look like?

    resources:
    - name: s3-file
      type: s3
      source:
        access_key_id: {{!vault.s3-file.access_key_id}}
        secret_access_key: {{!vault.s3-file.secret_access_key}}
    

    Here we have a snippet of pipeline configuration. Everything looks normal except the secrets on the last 2 lines. This would be a new syntactic convention that the regular templating would ignore and pass directly up to the server. When the server needed to do something that required a realized value of one of these references it would fetch it as late as possible from the server and then handle revoking it once it isn't required anymore. This means that (assuming Vault is set up correctly) each check run and each build would get a single use credential that would become invalid immediately. This is rad. :100:

    The syntax shown above is not finalized but needs to have a few components:

    • vault refers to the name of the secret store from which the credential should be fetched. This would allow multiple stores per Concourse server as long as they were all named uniquely. A secret store should probably belong to a team rather than being global.
    • s3-file refers to the name of the secret inside Vault.
    • access_key_id and secret_access_key refer to the attributes on the secret.

    Open Questions

    • What if the server goes down in the middle of using one of these secrets. Who revokes it?
    • How does Concourse authenticate with the secret store? Does this just move the problem?

    Risks

    • Yet another thing to deploy next to Concourse in order to use the feature. This moves away from secure by default. This could be partially mitigated by making it easy for people to get started with Vault. (BOSH release, adding something to the monolithic binaries)
    security 
    opened by xoebus 64
  • Ability to re-trigger failed build with the same input versions

    Ability to re-trigger failed build with the same input versions

    When using the new version: every configuration for a get task, it is possible to arrive at a state where you have multiple builds of the same job running at the same time. If an earlier build fails, there is no way to re-trigger it with the same set of inputs. We haven't been able to determine a useful workaround; setting serial: true doesn't really help in this scenario, because the next build will start as soon as the first one fails.

    It would be helpful if there were a way to re-trigger the job with the same inputs as a particular build (failed or otherwise).

    Let us know if you need more details on this scenario or our desired fix. Thanks!

    @davewalter and @rmasand

    web-ui core/build-plan enhancement release/documented 
    opened by davewalter 56
  • New resource interface (+ add versioning)

    New resource interface (+ add versioning)

    Proposed changes

    1. Rename in and out scripts to get and put. These are confusingly named something different because a long time ago jobs just had _in_puts and _out_puts.
    2. Run ./check, ./get, and ./put, and ./info (see next point) rather than /opt/resource/X. Having them in /opt is a bit Linux-specific and assumes containers have their own chroot, which is not the case on Darwin or Windows.
    3. Add a info script which prints the resource's API version, e.g. {"version":"2.0"}. This will start at 2.0. If /info does not exist we'll execute today's resource interface behavior.
    4. Change get to not emit the version or metadata. This was from when in didn't know what it was fetching until it was done. It should now be an error if it can't fetch the requested version. We'll also move all metadata collection to check (see point 8).
    5. Add a delete action, which looks like put (can be given files and params to determine what to delete) but returns the set of versions that it deleted. This is to support bulk deletes, e.g. to garbage collect intermediate artifacts after a final build is shipped.
    6. Remove the source and destination arguments passed to get and put - just make it the working directory.
    7. Give check an official scratch space, which is the current working directory. No real semantics change here, just consistency with get and put, and potential for future behavior like reusing the scratch space but not reusing check containers for extended periods. Note: we've introduced /scratch recently so this change may just mean making that the work-dir.
    8. Move all metadata emitting to check, so that it's always present. The original thought was that metadata collection may be expensive, but so far we haven't seen that to be the case.
    9. Change put to emit an array of versions, rather than just one, and without metadata. Technically the git resource may push many commits, so this is necessary to track them all as outputs of a build. This could also support batch creation. Notably, the versions emitted by put are ordered chronologically, so that the dependent get knows to fetch the latest version. We would save them internally, along with an association with the build, and rely on check to determine the final ordering and metadata, being careful to not leave gaps in the version history (i.e. other commits pushed slightly before the put registered the build's).
    10. Change put to write to a specified file, rather than stdout, so that we don't have to be attached to process its response. This is one of the few ways a build can error after the ATC reattaches (unexpected end of JSON). With it written to a file, we can just try to read the file when we re-attach after seeing that the process exited. This also frees up stdout/stderr for normal logging, which has been an occasional pitfall during resource development/debugging.
    11. Remove the distinction between source and params; resources will receive a single config. The distinction will remain in the pipeline. This makes it easier to implement a resource without planning ahead for interesting dynamic vs. static usage patterns, and will get more powerful with #684.
    core/flow core/build-plan enhancement wontfix 
    opened by vito 54
  • Aggregate issue: builds stuck in

    Aggregate issue: builds stuck in "pending" state

    There have been a few reports lately of jobs being unable to schedule. It's been difficult for us to progress on this as we never see it ourselves and there's generally not enough information provided to find a smoking gun. Which is no one's fault really - we haven't given great instructions as to what information would be valuable and how to collect it! So, that's what this issue is for.

    If you're seeing this problem, please include a screenshot of the build preparation section of the build view.

    Also answer the following:

    • Are all of your workers present? (fly workers)
    • Is there a check container present for each of the inputs to your job? (fly hijack -c pipeline-name/resource-name)
      • Do any of the check containers have a running /opt/resource/check process? If so, that may be hanging. What resource type is it?
    • What is the uptime of your workers and ATC?
    • Are your workers registered directly (BOSH default) or forwarded through the TSA (binary default/external workers registering with BOSH deployment)?
    • Which IaaS?
      • If you're on GCP, have you configured the MTU of your workers to be 1460 to match the VM? If not, it defaults to 1500, which would cause things to hang.
      • Can you reach the workers from your ATC? (curl http://<worker ip:port>/containers) You can collect the IP + port from fly workers -d.

    In addition to that, the most valuable information will be stack dumps of both the ATC and the TSA.

    You can collect a stack dump from the ATC by running:

    curl http://127.0.0.1:8079/debug/pprof/goroutine?debug=2
    

    ...and from the TSA by sending SIGQUIT and collecting the output from stderr. Note that if you're running the binaries, the above curl command will include the TSA's stack, so don't worry about getting it separately. Also note that SIGQUIT will kill the TSA process, so you'll need to bring it back after. (While you're at it, let us know if that fixed it. :P)

    Thanks all for your patience, sorry we're taking so long to get to the bottom of this.

    bug resiliency 
    opened by vito 52
  • Workers stall due to dropped connection, client doesn't recover, web node leaks goroutines

    Workers stall due to dropped connection, client doesn't recover, web node leaks goroutines

    Bug Report

    In our large-scale algorithm test environment, workers gradually stalled over the course of 2 days:

    Screen Shot 2020-01-29 at 10 36 01 AM

    In investigating one of the workers, the machine seemed fine, but its logs showed that it simply stopped heartbeating. It must have been stuck somewhere.

    lsof -p <worker pid> revealed that there wasn't even an active connection to the TSA anymore (port 222).

    Through this time, web node memory usage and goroutines crept up:

    Screen Shot 2020-01-29 at 10 36 39 AM

    Upon restarting all of the workers (i.e. bosh restart worker), the web goroutines dropped dramatically, and the memory usage slightly recovered (note: these graphs are over the past hour):

    Screen Shot 2020-01-29 at 10 38 54 AM

    Steps to Reproduce

    Not sure yet. May need to just chaos test this.

    Expected Results

    I would expect the worker client to notice that the connection is broken and to recover/reconnect.

    Actual Results

    The worker client hung forever and stopped heartbeating/registering.

    Additional Context

    Goroutine dumps: https://gist.github.com/vito/a53e8b484a3d254a0872ebe7f5d15773

    The dumps are large; I would recommend cloning the gist instead:

    $ git clone https://gist.github.com/vito/a53e8b484a3d254a0872ebe7f5d15773
    

    Version Info

    • Concourse version: master
    • Deployment type (BOSH/Docker/binary): BOSH
    • Infrastructure/IaaS: GCP
    • Browser (if applicable): n/a
    • Did this used to work? probably not
    bug resiliency epic domain/runtime 
    opened by vito 49
  • Random DNS resolution issues on workers (5.4.0)

    Random DNS resolution issues on workers (5.4.0)

    After upgrading to 5.4.0, it looks like our workers are seeing seemingly random DNS resolution failures.

    14 minutes into the build (after downloading things successfully from a host), dns resolution randomly fails.

    Here's an example:

    Resolving package dependencies ...
    --2019-07-23 18:38:54--  https://eu.hpkg.haiku-os.org/haikuports/master/build-packages//packages/groff-1.22.3-1-x86_64.hpkg
    Resolving eu.hpkg.haiku-os.org (eu.hpkg.haiku-os.org)... 62.210.188.85
    Connecting to eu.hpkg.haiku-os.org (eu.hpkg.haiku-os.org)|62.210.188.85|:443... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 7633254 (7.3M) [application/octet-stream]
    Saving to: 'download/groff-1.22.3-1-x86_64.hpkg'
    
    download/groff-1.22.3-1-x86_64.hpkg                                                                                          100%[==============================================================================================================================================================================================================================================================================================================================================>]   7.28M  6.30MB/s    in 1.2s    
    
    2019-07-23 18:38:56 (6.30 MB/s) - 'download/groff-1.22.3-1-x86_64.hpkg' saved [7633254/7633254]
    
    --2019-07-23 18:38:56--  https://eu.hpkg.haiku-os.org/haikuports/master/build-packages//packages/libiconv-1.15-4-x86_64.hpkg
    Resolving eu.hpkg.haiku-os.org (eu.hpkg.haiku-os.org)... failed: Temporary failure in name resolution.
    wget: unable to resolve host address 'eu.hpkg.haiku-os.org'
    
    export imagePath="haiku.image"
    export isImage="1"
    export isVMwareImage=""
    ../haiku-git/build/scripts/build_haiku_image /tmp/build/e05da604/generated.x86_64/./haiku.image-init-vars /tmp/build/e05da604/generated.x86_64/./haiku.image-make-dirs /tmp/build/e05da604/generated.x86_64/./haiku.image-copy-files /tmp/build/e05da604/generated.x86_64/./haiku.image-extract-files
    
    ...failed BuildHaikuImage1 haiku.image ...
    ...removing haiku.image
    
    BUILD FAILURE:
    ...failed updating 1 target(s)...
    ...skipped 1 target(s)...
    ...updated 14957 target(s)...
    

    a wget works as expected, then 5 seconds later a wget from the same host fails to resolve.

    bug wontfix 
    opened by kallisti5 44
  • can not login after upgrading to 4

    can not login after upgrading to 4

    i have the following set for my web config

    CONCOURSE_BASIC_AUTH_USERNAME=admin
    CONCOURSE_BASIC_AUTH_PASSWORD=xxxxxx
    CONCOURSE_EXTERNAL_URL=https://ci.xxxx.com
    
    CONCOURSE_MAIN_TEAM_LOCAL_USER=admin
    CONCOURSE_ADD_LOCAL_USER=admin:xxxxxx
    CONCOURSE_MAIN_TEAM_ALLOW_ALL_USERS=true
    

    now when i try and login, it just sits there spinning. if i look in the inspector i can see it pending on

    https://ci.xxxx.com/sky/callback?code=btkstm4h47f23yugenht5v5s2&state=eyJyZWRpcmVjdF91cmkiOiIvIiwiZW50cm9weSI6IjQzNWY1N2NiZDNiMWZmYTMzNGZmNGUxYmRhOThmYjMxNzUxNTg4YThhYzFkNDQ2N2QxMGJkMmYyMzkyOTg1MzIifQ%3D%3D

    it will finally time out after a while.

    in the logs i see

    Aug  4 00:21:36 ip-10-200-1-205 concourse[4491]: {"timestamp":"1533342096.544905424","source":"atc","message":"atc.dex.event","log_level":1,"data":{"fields":{},"message":"login successful: connector \"local\", name=\"\", email=\"admin\", groups=[]","session":"5"}}
    

    if i put in the wrong login info it instantly comes back and says bad login/password. when it does work it seems to just timeout.

    after it times out i see this in the log:

    Aug 4 00:27:10 ip-10-200-1-205 concourse[4491]: {"timestamp":"1533342430.388325930","source":"atc","message":"atc.sky.callback.failed-to-fetch-dex-token","log_level":2,"data":{"error":"Post https://ci.wizr.com/sky/issuer/token: dial tcp 34.210.127.211:443: i/o timeout","session":"4.277"}}

    bug accepted regression 
    opened by phynias 43
  • Trigger job with custom parameters

    Trigger job with custom parameters

    Feature Request

    What challenge are you facing?

    I want to build a pipeline that has a deploy step that can deploy to many different environments, eg:

    build image -> test image -> deploy

    where the 'deploy' job can deploy to one of several environments. We have a bunch of servers running that different teams use (around 20). Currently, it seems like with concourse, to be able to quickly deploy to any one of those 20 environments, we need to create 20 separate deploy jobs, which is not the ideal (especially when I think about having pipelines for multiple microservices as we build them out).

    A Modest Proposal

    The ideal for us would be if when someone kicks off the 'deploy' job, there would be a UI prompt for them to enter what environment they want (eg 'environment-12') and that gets passed to the appropriate task

    core/build-plan 
    opened by cameron-r 43
  • Allow Concourse to receive git post-commit hooks

    Allow Concourse to receive git post-commit hooks

    We have GHE admins who are having their deployment of GHE face-melted by some over eager polling and a somewhat large dev organization.

    Would it be possible to have concourse accept github post-commit hooks to trigger git-resources? Maybe for other repo resources as well.

    opened by superbeeny 43
  • Implement a new scheduler algorithm for determining job input candidates

    Implement a new scheduler algorithm for determining job input candidates

    Tentative issue to track known issues with the current algorithm and track any progress/thoughts on a new algorithm to replace it.

    Problems with the current algorithm:

    • It loads up all versions and build inputs and outputs for the entire pipeline, meaning memory use and network transfer from the DB will increase as this data set grows. This is also slow as it involves a bunch of joins across a ton of data. See #2624, #3487, #3426.
      • We are also careful to cache this so it's only loaded when the data changes, but that can only help so much - periodic jobs or resources will invalidate the cache anyway.
    • The algorithm itself is fairly brutal; it's hella optimized but prone to worst-case scenarios where it churns and uses a ton of CPU. And it's difficult to instrument without slowing it down.

    An experimental new algorithm lives on the algorithm-experiment branch.

    efficiency bump/major core/scheduling enhancement release/documented sred 
    opened by vito 41
  • Action Required: Fix Renovate Configuration

    Action Required: Fix Renovate Configuration

    There is an error with this repository's Renovate configuration that needs to be fixed. As a precaution, Renovate will stop PRs until it is resolved.

    Location: .github/renovate.json Error type: Invalid JSON (parsing failed) Message: Syntax error: expecting end of expression or separator near "grou

    opened by renovate[bot] 0
  • Turn off connection tracker by default and provide an option to turn on.

    Turn off connection tracker by default and provide an option to turn on.

    Changes proposed by this PR

    closes #8432

    • [x] done

    Notes to reviewer

    image

    After applying a private build of this PR, ATC CPU usage dropped to a reasonable level.

    Once this PR is merged, I can port it to master branch.

    Release Note

    • Turned off /debug/connections at ATC start time. It can be turned on at runtime by /debug/connections/on, and then turned off by /debug/connections/off.
    bug 
    opened by evanchaoli 0
  • ATC usage is very high

    ATC usage is very high

    Summary

    After upgrade one of cluster from 6.7.8, ATC cpu usages got to very high:

    image

    Gprofile shows:

    runway-atc-74494cb468-wssnf

    Where ConnectionTracker was added by @vito 5 years ago: https://github.com/concourse/concourse/commit/8425a0b4e775d52732d4a54090a0e63b236095a4

    I don't know why, but maybe new golang version takes more resources to generate call stacks. I created a private build that turned off ConnectionTracker, and that seemed to solve the problem.

    Triaging info

    • Concourse version: 7.8.1
    • Browser (if applicable):
    • Did this used to work?
    bug 
    opened by evanchaoli 0
  • Feature request: opaque key in pipeline YAML (user-provided data)

    Feature request: opaque key in pipeline YAML (user-provided data)

    Today, although it is possible to add any key non belonging to the Concourse pipeline syntax to a pipeline YAML (for example for YAML anchors), fly set-pipeline will strip any such keys before uploading to Concourse.

    What we propose is to agree on one top-level key name (example: userdata), that would be left alone by fly and accepted as an opaque blob by Concourse, so that a subsequent fly get-pipeline (or equivalent HTTP API call) would give back a pipeline YAML that preserves such key.

    Rationale

    We generate the pipelines programmatically. We would like to add metadata meaningful to us, such as Organization team name (as opposed to a Concourse team), so that we can perform further operations when processing the output of fly get-pipeline.

    We believe that such userdata could be useful also for manually edited pipelines, although the more pipelines one has, the more the need of such feature becomes apparent.

    Prior art

    The concept of opaque "user data" or "context" is used both in operations (for example, cloud-init and its "user data") and in programming (for example the "context" passed to a callback function).

    Offer to help

    If this feature is consider useful, we will be happy to provide a PR.

    opened by marco-m-pix4d 0
  • Allow SSM Parameters to specify a format using tags

    Allow SSM Parameters to specify a format using tags

    Changes proposed by this PR

    Currently, there is no way to access fields from vars sourced via SSM. This is because Concourse has no understanding of the format the parameter value is in. This change allows Concourse to read SSM parameter tags (with ssm:ListTagsForResource) and check for a tag called "format" which will behave the exact same as the load_vars format. Thus allowing JSON and YAML formats to be loaded.

    • [x] implement unmarshalling using a value set in the tags
    • [ ] create tests for various formats, and failures in retrieving tags from AWS
    • [ ] check for any remaining steps I could have missed in this...

    Notes to reviewer

    Most of the code is a modified version of the load_vars handler. Maybe these should be moved into a shared location?

    Release Note

    • The AWS SSM credential manager can now load different file formats when a format is specified in a tag named format on the parameter
    enhancement 
    opened by ConnorWidtfeldt 6
  • Web Node: otel collector getting oom-killed

    Web Node: otel collector getting oom-killed

    Summary

    Investigate the issue of the Web node restarting

    Additional context

    Doubling the memory limit on otel collector and redeploying Web Node seems to resolve the issue. Happened on Hushhouse deployment

    Triaging info

    • Concourse version: v7.8
    bug 
    opened by navdeep-pama 1
Releases(v7.8.1)
  • v7.8.0(Jun 6, 2022)

    🚨 Breaking

    • Do not cache secrets indefinitely when using Vault KV v2 (#7955) @sprsquish :link:
      For who uses Vault KV v2 as their creds manager, this change eliminates the ability to set an infinite cache duration, which may be a bug others are relying on.

    ✈️ Features

    • Add --team to fly watch (#8171) @dhantha :link:

      • Added team flag to fly watch command, you could use this in the following format fly -t example watch --job my-pipeline/tests --build 52 --team other-team
    • Add no-input-strategy and let get/check use it. (#8183) @evanchaoli :link:

      • Add optional flag --no-input-container-placement-strategy for configuring a container placement strategy used for only get and nested check steps. Configuring this strategy will prevent get/check step to be placed to a busy worker.
    • Optimize worker selection when global-resources is enabled (#8184) @evanchaoli :link:

    • Add fly clear-versions command (#8196) @clarafu :link:

      • Can be used to clear version history of a resource or resource type
      • Can only be used by an admin user
      • If you have global-resources enabled, it can possibly delete version histories of other resources/resource-types in other pipelines so there is a warning message that will show any resources or resource types that are affected.
    • Enhance locks (#8198) @evanchaoli :link:

      • Optimize work load distribution across ATCs.
    • Add prometheus emitter for jobs scheduled duration (#8276) @maxknee :link:

    • Expose ATC_EXTERNAL_URL to task env. (#8277) @evanchaoli :link:

    • Avoid duplicating parallel volume streams (#8322) @andy-paine from Depop :link:

      • Steps that stream volumes will now use a global (per worker) lock to ensure identical volumes are not streamed more times than they need to be
      • A new waiting-for-streamed-volume/waiting for volume <name> to be streamed by another step event is included in build step logs where this behavior occurs
    • Force checks on nested resource types when manually triggered build (#8342) @clarafu :link:

      • When a build is manually triggered, it will cause any nested resource types or images to skip its checking interval, essentially forcing a check. This will not result in the same resource type getting checked multiple times if it appears multiple times in a build.

    🐞 Bug Fixes

    • Reset resource config IDs on save (#8002) @rjinskidepop :link:

      • Fixes #7468 where wrong resource config was used
    • Show var source error on resource and build page (#8015) @xtremerui :link:

      • Now error caused by variable interpolation can be shown correctly on resource and build page.
    • Fix a bug when a worker is pruned, volumes streamed from it got destroyed immediately (#8100) @evanchaoli :link:

      • Now if opt in EnableCacheStreamedVolumes, worker cache volumes are kept around whilst they are still in use
    • Automatic pipeline archiver archiving child pipelines when parent job has a failed/errored build (#8179) @clarafu :link:

      • Also fixes a bug where the pipeline archiver re-archives pipelines that are already archived
    • Don't run resource type check if within check interval (#8253) @clarafu :link:

      • Fixes a bug where resource types were getting checked every build. Now they will respect the resource checking interval and not run a check if the interval has not elapsed.
    • Fix acrossStep handling for more than 3 vars (#8271) @nexeck :link:

    • Inherite env proxy configure when tls enabled (#8306) @xtremerui :link:

      • Fix a bug that proxy setting through env var got lost when TLS is enabled by --tls-bind-port
    • Introduce OIDC get user info flag (#8353) @danpilch :link:

      • Add CONCOURSE_OIDC_DISABLE_GET_USER_INFO flag. OIDC connector will now fetch additional claims from OpenID UserInfo endpoint. This should fix the problem of configuring Concourse team auth by OIDC user groups due to groups claims missing in some identity providers' auth response.
    • Fix default username prompt for local logins (#8362) @ibokuri :link:

      • Ensure the default username prompt for local logins is properly set.

    🤷 Miscellaneous

    • Automatic pipeline archiver accidentally archives child pipelines during a build run (#8137) @clarafu :link:

    • Bump cloudfoundry dependencies in go mod (#8219) @xtremerui :link:

    • UI build page tweaks (#8254) @xtremerui :link:

      • Increase contrast on Build page title when build is aborted. Add more spacing and boarder for history build numbers.
    • Update credhub var lookup logic (#8265) @xtremerui :link:

    • Add Quick Start Documentation for M1 Machines (#8282) @jlamb1 :link:

    • Bump vault api and add srv lookup flag (#8324) @xtremerui :link:

      • Bump Vault API package to latest version and add --disable-srv-lookup flag to Vault configure. If your current Vault URL contains a port number, this change makes no impact. If your Vault URL dose not contain port number, by default SRV lookup is opt-in for backward compatibility. In this case, one can use the flag to disable the feature to avoid unnecessary requests from Vault client.
    • Do not force resource type check on get step (#8363) @xtremerui :link:

    📦 Bundled resource types

    Source code(tar.gz)
    Source code(zip)
    concourse-7.8.0-darwin-amd64.tgz(121.34 MB)
    concourse-7.8.0-darwin-amd64.tgz.sha1(75 bytes)
    concourse-7.8.0-linux-amd64.tgz(1339.58 MB)
    concourse-7.8.0-linux-amd64.tgz.sha1(74 bytes)
    concourse-7.8.0-windows-amd64.zip(117.45 MB)
    concourse-7.8.0-windows-amd64.zip.sha1(76 bytes)
    fly-7.8.0-darwin-amd64.tgz(27.21 MB)
    fly-7.8.0-darwin-amd64.tgz.sha1(69 bytes)
    fly-7.8.0-linux-amd64.tgz(27.34 MB)
    fly-7.8.0-linux-amd64.tgz.sha1(68 bytes)
    fly-7.8.0-windows-amd64.zip(27.45 MB)
    fly-7.8.0-windows-amd64.zip.sha1(70 bytes)
  • v7.7.1(Mar 28, 2022)

    🐞 Bug Fixes

    • Fix automatic pipeline archive bug (#8200) @clarafu :link:

      • Removes the line that introduced a bug in 7.7.0 where child pipelines can get archived accidentally.
      • Fixes a bug where pipelines that are already archived get re-archived

    🤷 Miscellaneous

    • Backport allow go 1.18 darwin error message in unit tests (#8203) @clarafu :link:

    📦 Bundled resource types

    Source code(tar.gz)
    Source code(zip)
    concourse-7.7.1-darwin-amd64.tgz(117.05 MB)
    concourse-7.7.1-darwin-amd64.tgz.sha1(75 bytes)
    concourse-7.7.1-linux-amd64.tgz(1315.90 MB)
    concourse-7.7.1-linux-amd64.tgz.sha1(74 bytes)
    concourse-7.7.1-windows-amd64.zip(113.21 MB)
    concourse-7.7.1-windows-amd64.zip.sha1(76 bytes)
    fly-7.7.1-darwin-amd64.tgz(26.16 MB)
    fly-7.7.1-darwin-amd64.tgz.sha1(69 bytes)
    fly-7.7.1-linux-amd64.tgz(26.26 MB)
    fly-7.7.1-linux-amd64.tgz.sha1(68 bytes)
    fly-7.7.1-windows-amd64.zip(26.39 MB)
    fly-7.7.1-windows-amd64.zip.sha1(70 bytes)
  • v7.7.0(Mar 9, 2022)

    ✈️ Features

    • Automatically pause pipelines (#7876) @taylorsilva :link:

      • Adds a new component that will automatically pause pipelines that have not run in more than the configured number of days. The number of days can be configured with CONCOURSE_PAUSE_PIPELINES_AFTER. A value of zero (the default) disables this component. On first run it will retroactively pause pipelines that already fall out of the given day range.
        • Exceptions: Pipelines that have no builds falling within the day range but have been updated in <24hrs will not be automatically paused. This is to cover the case where someone sets a new pipeline and hasn't run any jobs for it yet.
    • Allow task/set_pipeline name to include across step var (#7717) @xtremerui :link:

      • Identifiers for task and set_pipeline steps wrapped by the across step can now have their identifier/step name as a var ((.:some-var)) and won't receive a warning about the name being deprecated
    • Adding missing prometheus emitters for events (#7730) @maxknee :link:

      • Adding GC and missing metrics to prometheus emitter.
    • Adding dry-run mode to fly set-pipeline command (#7734) @Caprowni :link:

      • This adds a dry-run feature to the set-pipeline command within the Fly CLI, the main purpose of this is to allow users to check what would be changed without any interactive-prompt/danger of applying by mistake.
    • Prefer FLY_HOME over HOME (if set) as the directory for storing .flyrc (#7747) @rcw5 :link:

    • Add team to resource commands and archive pipeline command (#7772) @Caprowni :link:

      • Added --team flag to fly command check-resource, you can use it like this fly -t dev check-resource -r some-pipeline/branch:master/myresource --team test
      • Added --team flag to fly command check-resource-type, you can use it like this fly -t dev check-resource-type -r some-pipeline/branch:master/myresource --team test
      • Added --team flag to fly command resources, you can use it like this fly -t dev resources -p some-pipeline --team test
      • Added --team flag to fly command resource-versions, you can use it like this fly -t dev resource-versions -r some-pipeline/branch:master/myresource --team test
      • Added --team flag to fly command archive-pipeline, you can use it like this fly -t dev archive-pipeline --pipeline some-pipeline --team test
    • Batch opentelemetry requests (#7840) @schmurfy :link:

    • AWS SecretsManager can be used from var_sources (#7897) @PG2000 :link:

    • Shared (top level) secrets in AWS secrets manager (#7928) @areller :link:

    • Garbage collect task caches from paused pipelines (#7989) @xtremerui :link:

      • When a pipeline or a job is paused, the task caches that used in the pipeline's job will be garbage collected. This should help free up worker disk space.
    • Add build event for volume streaming (#8031) @andy-paine :link:

      • Build logs will now contain new events when a volume is being streamed to a worker Screenshot 2022-02-02 at 11 39 01
    • Optimize ATC performance by avoid unneccessary go-routines of no-op check notifiers (#8045) @evanchaoli :link:

    • Allow use of fields when using AWS Secrets Manager (#8055) @kurtmc :link:

    • Ignore cached input from volume-locality's consideration (#8061) @evanchaoli :link:

      • When EnableCacheStreamedVolume is enabled and container placement strategy is volume-locality, as get step may not fetch a resource if the resource is found in cache, following step containers may all be placed to the worker where cached resource is found. That worker might be overloaded when there are other workers available. This PR fixes the problem.
    • Enhance volume-locality strategy (#8063) @evanchaoli :link:

      • Optimize database queries for volume-locality container placement strategy
    • Optimize limit active tasks strategy logic (#7874) @xtremerui :link:

      • Optimize limit-active-tasks strategy to reduce DB load and avoid deadlocking when under heavy load.
    • Allow text whitespace to be preserved in step metadata (#8128) @steve-sienk :link:

      • Wrap text of resource metadata on web view.

    🐞 Bug Fixes

    • Fix bug of resource type checks (#8048) @evanchaoli :link:

      • Remove lock on checking resource types and prototypes, this will result in a small behaviour change. For example, if you have multiple resources that use the same resource type and those resources run a check for that resource type at the same time, the resource type will be checked multiple times. This was the behaviour before 7.3.0 so we are reverting back to this behaviour.
      • Fixes a bug introduced in 7.6.0 where resource type resource_config_id were never updated.
    • Increase color contrast on build page (#7756) @xtremerui :link:

      • Increase contrast of text on build page after color changes from the previous release that made it harder to read the text
    • Add error message to the create artifact API call (#7899) @Caprowni :link:

    • Porting down migration improvements for build event sequences (#7913) @clarafu :link:

      • If you are on v7.6.0 and want to downgrade, you might end up with some builds that never finish and run into some web log errors like pq: relation "build_event_id_seq_<sequence-id>" does not exist. This is because of a bug in the down migration which is fixed with this PR.
        • If you do run into this problem, you can easily fix it by running create sequence build_event_id_seq_<sequence-id> minvalue 0 start with 0; on your postgres database (You will need to replace with the id that does not exist in the error).
    • Only delete btrfs mounts if *.img exists (#7920) @taylorsilva :link:

      • Concourse worker would fail to start if it's on a btrfs filesystem and tries to use the overlay driver
    • AWS Secrets Manager will treat secret with marked for deletion as deleted (#7933) @areller :link:

    • Handling huge volumes transfer in P2P streaming (#7942) @evanchaoli :link:

      • Fix a bug that P2P streaming would fail if streaming a volume takes longer than 3 minutes. This fix should be applied to both ATCs and workers.
    • Avoid stale prometheus worker metrics when using multiple web nodes (#7965) @databus23 :link:

    • GC builds based on chronological order (#7978) @xtremerui :link:

      • Fix a bug that events of a rerun build be reaped immediately if its prarent build is already reaped. Now candidate builds for GC will be ordered chronologically.
    • Run task caches collector when ATC starts (#7987) @xtremerui :link:

      • Previously when a pipeline is archived, the task caches used in its job will not be garbage collected, which will cause volume leaks in worker disk. Now a component for GC task caches will runs when ATC starts.
    • Bump concourse dex by upstream v2.31.0 (#8050) @xtremerui :link:

      • Fix Bitbucket auth connector failure due to upstream API deprecation.
    • Render nested across steps (#8069) @areller :link:

      • Fix a rendering issue with nested across steps.
    • Fix syntax error in down migration file (#8082) @xtremerui :link:

      • Fix a SQL syntax error that might cause down migration failure.
    • Render build page correctly for legacy aggregate step (#8092) @xtremerui :link:

      • Show legacy builds with aggregate steps. Pipeline configure with aggregate step is still deprecated. This is just fixing the UI rendering error.
    • Fix log line in stream out (#8098) @andy-paine :link:

    🤷 Miscellaneous

    • Fix fly hijack due to containerd runc update (#7886) @xtremerui :link:

    • Refactor pipeline lifecycle in atc/db (#7895) @taylorsilva :link:

    • Do not send check build events to syslog drainer (#7922) @xtremerui :link:

      • Since v7.0, resouce and resource type checks are ran as builds. When syslog drainer is enabled, those check build events are also sent to external server, which requires storage space (depends on amount of resources and check interval). Now this type of events will be ignored by syslog drainer.
    • Bump Golang to 1.17 in go.mod and add goproxy in dockerfile (#7926) @evanchaoli :link:

    • Remove unused gc-container-collector-dropped metric (#7932) @databus23 :link:

    • Bump golang crypto lib (#8032) @xtremerui :link:

    • A tiny db sql refactor of changing multiple from to left join (#8046) @evanchaoli :link:

    • Bump worker version to 2.4 (#8081) @xtremerui :link:

    📦 Bundled resource types

    Source code(tar.gz)
    Source code(zip)
    concourse-7.7.0-darwin-amd64.tgz(114.06 MB)
    concourse-7.7.0-darwin-amd64.tgz.sha1(75 bytes)
    concourse-7.7.0-linux-amd64.tgz(1314.91 MB)
    concourse-7.7.0-linux-amd64.tgz.sha1(74 bytes)
    concourse-7.7.0-windows-amd64.zip(110.03 MB)
    concourse-7.7.0-windows-amd64.zip.sha1(76 bytes)
    fly-7.7.0-darwin-amd64.tgz(25.36 MB)
    fly-7.7.0-darwin-amd64.tgz.sha1(69 bytes)
    fly-7.7.0-linux-amd64.tgz(25.50 MB)
    fly-7.7.0-linux-amd64.tgz.sha1(68 bytes)
    fly-7.7.0-windows-amd64.zip(25.68 MB)
    fly-7.7.0-windows-amd64.zip.sha1(70 bytes)
  • v7.4.4(Jan 6, 2022)

    🐞 Bug Fixes

    • Fix down migration for build event sequences (#7860) @clarafu :link:
      • This PR fixes a typo in a down migration that affects Concourse version 7.4.1, 7.4.2 and 7.4.3. Therefore, you will be unable to downgrade from any of those listed versions. If you are currently on 7.4.1, 7.4.2 or 7.4.3, you will need to downgrade back to 7.4.0 before you can upgrade to this version of 7.4.4. The instructions on how to downgrade to 7.4.0 is documented in the release notes of the 7.4.x version you are on.

    📦 Bundled resource types

    Source code(tar.gz)
    Source code(zip)
    concourse-7.4.4-darwin-amd64.tgz(109.34 MB)
    concourse-7.4.4-darwin-amd64.tgz.sha1(75 bytes)
    concourse-7.4.4-linux-amd64.tgz(1378.30 MB)
    concourse-7.4.4-linux-amd64.tgz.sha1(74 bytes)
    concourse-7.4.4-windows-amd64.zip(105.15 MB)
    concourse-7.4.4-windows-amd64.zip.sha1(76 bytes)
    fly-7.4.4-darwin-amd64.tgz(24.40 MB)
    fly-7.4.4-darwin-amd64.tgz.sha1(69 bytes)
    fly-7.4.4-linux-amd64.tgz(24.51 MB)
    fly-7.4.4-linux-amd64.tgz.sha1(68 bytes)
    fly-7.4.4-windows-amd64.zip(24.47 MB)
    fly-7.4.4-windows-amd64.zip.sha1(70 bytes)
  • v7.4.3(Dec 2, 2021)

    🚨 IMPORTANT!

    If you are on 7.4.1 or 7.4.2, you will need to downgrade back to 7.4.0 using backups you have or the script 7.4.x-down-migration.sh included in the assets of this release. Only after downgrading can you safely upgrade directly to 7.4.3 or any later version of Concourse

    • If you are using the 7.4.x-down-migration.sh script to downgrade your Concourse deployment, you do NOT need to run the concourse migrate command because the script essentially is doing that for you. The reason we need this script is because there is a bug in the concourse migrate downgrade scripts. The script requires you to have the psql, access to your postgres database and also the following environment variables that you should already have from starting concourse $CONCOURSE_POSTGRES_PASSWORD, $CONCOURSE_POSTGRES_USER, $CONCOURSE_POSTGRES_HOST, $CONCOURSE_POSTGRES_DATABASE, $CONCOURSE_POSTGRES_PORT.

    🐞 Bug Fixes

    • Change migrations timestamp to avoid upgrade issues ( CI: skip-migrations-check ) (#7754) @muntac :link:

      • Change timestamp of backported DB migration to avoid skipping any migrations when upgrading to 7.5 and later versions.
        • If you are on 7.4.1 or 7.4.2 then downgrade back to 7.4.0 using backups you have or the concourse migrate command, using the 7.4.1/7.4.2 version of the binary to downgrade back to 7.4.0. The 7.4.0 database version is 1625844436. Then you can safely upgrade directly to 7.4.3 or any later version of Concourse
    • Fixes for bugs in 7.4.2 (#7758) @clarafu :link:

      • Fix bugs introduced in 7.4.1 related to the errors save image get event: pq: duplicate key value violates unique constraint "pipeline_build_events_x_build_id_event_id" and create resource config: pq: deadlock detected

    📦 Bundled resource types

    Source code(tar.gz)
    Source code(zip)
    7.4.x-down-migration.sh(1.44 KB)
    concourse-7.4.3-darwin-amd64.tgz(109.35 MB)
    concourse-7.4.3-darwin-amd64.tgz.sha1(75 bytes)
    concourse-7.4.3-linux-amd64.tgz(1378.34 MB)
    concourse-7.4.3-linux-amd64.tgz.sha1(74 bytes)
    concourse-7.4.3-windows-amd64.zip(105.15 MB)
    concourse-7.4.3-windows-amd64.zip.sha1(76 bytes)
    fly-7.4.3-darwin-amd64.tgz(24.40 MB)
    fly-7.4.3-darwin-amd64.tgz.sha1(69 bytes)
    fly-7.4.3-linux-amd64.tgz(24.53 MB)
    fly-7.4.3-linux-amd64.tgz.sha1(68 bytes)
    fly-7.4.3-windows-amd64.zip(24.46 MB)
    fly-7.4.3-windows-amd64.zip.sha1(70 bytes)
  • v7.4.2(Oct 31, 2021)

    🚨 IMPORTANT! 🚨

    This release contains a bug https://github.com/concourse/concourse/issues/7683. Please avoid upgrading to this version and either upgrade to the next minor (7.6.0) or patch version (7.4.3) If you are on 7.4.1 or 7.4.2, you will need to downgrade back to 7.4.0 using backups you have or the script 7.4.x-down-migration.sh included in the assets of this release. Only after downgrading can you safely upgrade directly to 7.4.3 or any later version of Concourse

    • If you are using the 7.4.x-down-migration.sh script to downgrade your Concourse deployment, you do NOT need to run the concourse migrate command because the script essentially is doing that for you. The reason we need this script is because there is a bug in the concourse migrate downgrade scripts. The script requires you to have the psql, access to your postgres database and also the following environment variables that you should already have from starting concourse $CONCOURSE_POSTGRES_PASSWORD, $CONCOURSE_POSTGRES_USER, $CONCOURSE_POSTGRES_HOST, $CONCOURSE_POSTGRES_DATABASE, $CONCOURSE_POSTGRES_PORT.

    🐞 Bug Fixes

    • Fixed a bug where there would be a duplicate key violation for the event ID column in the build_events table (#7736) @clarafu :link:

    📦 Bundled resource types

    Source code(tar.gz)
    Source code(zip)
    7.4.x-down-migration.sh(1.44 KB)
    concourse-7.4.2-darwin-amd64.tgz(109.33 MB)
    concourse-7.4.2-darwin-amd64.tgz.sha1(75 bytes)
    concourse-7.4.2-linux-amd64.tgz(1378.42 MB)
    concourse-7.4.2-linux-amd64.tgz.sha1(74 bytes)
    concourse-7.4.2-windows-amd64.zip(105.15 MB)
    concourse-7.4.2-windows-amd64.zip.sha1(76 bytes)
    fly-7.4.2-darwin-amd64.tgz(24.40 MB)
    fly-7.4.2-darwin-amd64.tgz.sha1(69 bytes)
    fly-7.4.2-linux-amd64.tgz(24.52 MB)
    fly-7.4.2-linux-amd64.tgz.sha1(68 bytes)
    fly-7.4.2-windows-amd64.zip(24.46 MB)
    fly-7.4.2-windows-amd64.zip.sha1(70 bytes)
  • v7.6.0(Oct 28, 2021)

    ✈️ Features

    • Make Build page spacing consistent and color theme updated for accessibility (#7497) @ xtremerui :link:
      image

    • Avoid peridoic check build to use db (#7208) @evanchaoli :link:
      Changing Lidar triggered check builds to not use the database, which should mitigate the performance drop introduced by the big refactory of resource checks since 7.0.0.

    • Add default get/put/task timeout (#7426) @evanchaoli :link:

      • Allows Concourse administrator to configure global timeout for get, put and task steps.
      • Fixed a bug where global check timeout didn't work.
    • Indicate if a pipline is archived in pipeline view (#7463) @xtremerui :link:
      When viewing an archived pipeline (or any sub routes of it) in UI, the pipeline name now shows "archived" and the breadcrumbs background will change to grey so one won't confuse.

    • Worker: baggageclaim emits spans (#7487) @taylorsilva :link:

      • Workers now emit traces from the baggageclaim server so one can see volumes being created and streamed as part of a build

    🐞 Bug Fixes

    • atc/gc: make build reaper more robust (#7530) @taylorsilva :link:

      • Make build log reaper more robust by not exiting early if it encounters an issue while iterating over pipelines/jobs. Before this change build logs for some pipelines could have accumulated endlessly even with a build retention policy.
    • on_error should not run the hook when err is retriable (#7588) @taylorsilva :link:

      • Fixed a bug when --enable-rerun-when-worker-disappears was enabled and a job/step had an on_error hook. If the step was retried the on_error hook would run when it should not.
    • Revert node selection for rendering boxes (#7616) @taylorsilva :link:

      • Fixed a bug where jobs or resources whose name contained a dot . would not render correctly in the UI

    🤷 Miscellaneous

    • Clear resource config scope ID if source field changes (#7494) @taylorsilva :link:

    • Fix small typo on removeAll call comment (#7551) @EstebanFS :link:

    • Bump timeout for volume gc in integration tests (#7591) @clarafu :link:

    • Fix compilation error for bosh topgun test in CI (#7615) @xtremerui :link:

    • goimport all go files (#7661) @taylorsilva :link:

    • Removing un-needed loop (#7696) @maxknee :link:

    • Update test due to in-DB check change (#7707) @xtremerui :link:

    • Change sync.mutex to a pointer (#7719) @taylorsilva :link:

    • Static check resolutions (#7720) @taylorsilva :link:

    📦 Bundled resource types

    Source code(tar.gz)
    Source code(zip)
    concourse-7.6.0-darwin-amd64.tgz(110.57 MB)
    concourse-7.6.0-darwin-amd64.tgz.sha1(75 bytes)
    concourse-7.6.0-linux-amd64.tgz(1300.55 MB)
    concourse-7.6.0-linux-amd64.tgz.sha1(74 bytes)
    concourse-7.6.0-windows-amd64.zip(106.65 MB)
    concourse-7.6.0-windows-amd64.zip.sha1(76 bytes)
    fly-7.6.0-darwin-amd64.tgz(24.68 MB)
    fly-7.6.0-darwin-amd64.tgz.sha1(69 bytes)
    fly-7.6.0-linux-amd64.tgz(24.80 MB)
    fly-7.6.0-linux-amd64.tgz.sha1(68 bytes)
    fly-7.6.0-windows-amd64.zip(24.98 MB)
    fly-7.6.0-windows-amd64.zip.sha1(70 bytes)
  • v7.4.1(Oct 8, 2021)

    🚨 IMPORTANT! 🚨

    This release contains a bug https://github.com/concourse/concourse/issues/7683. Please avoid upgrading to this version and either upgrade to the next minor (7.6.0) or patch version (7.4.3) If you are on 7.4.1 or 7.4.2, you will need to downgrade back to 7.4.0 using backups you have or the script 7.4.x-down-migration.sh included in the assets of this release. Only after downgrading can you safely upgrade directly to 7.4.3 or any later version of Concourse

    • If you are using the 7.4.x-down-migration.sh script to downgrade your Concourse deployment, you do NOT need to run the concourse migrate command because the script essentially is doing that for you. The reason we need this script is because there is a bug in the concourse migrate downgrade scripts. The script requires you to have the psql, access to your postgres database and also the following environment variables that you should already have from starting concourse $CONCOURSE_POSTGRES_PASSWORD, $CONCOURSE_POSTGRES_USER, $CONCOURSE_POSTGRES_HOST, $CONCOURSE_POSTGRES_DATABASE, $CONCOURSE_POSTGRES_PORT.

    ✈️ Features

    • 7.4.x: add some DB optimizations (#7641) @taylorsilva :link:
      • DB optimizations
        • Increment an event ID in-memory instead of using a Postgres Sequence
        • Only update resource config if it hasn't been updated in a minute
        • Close zstd reader in load var step

    🤷 Miscellaneous

    • Backport baggageclaim to release/7.4.x (#7432) @taylorsilva :link:

    📦 Bundled resource types

    Source code(tar.gz)
    Source code(zip)
    7.4.x-down-migration.sh(1.44 KB)
    concourse-7.4.1-darwin-amd64.tgz(109.34 MB)
    concourse-7.4.1-darwin-amd64.tgz.sha1(75 bytes)
    concourse-7.4.1-linux-amd64.tgz(1296.81 MB)
    concourse-7.4.1-linux-amd64.tgz.sha1(74 bytes)
    concourse-7.4.1-windows-amd64.zip(105.15 MB)
    concourse-7.4.1-windows-amd64.zip.sha1(76 bytes)
    fly-7.4.1-darwin-amd64.tgz(24.40 MB)
    fly-7.4.1-darwin-amd64.tgz.sha1(69 bytes)
    fly-7.4.1-linux-amd64.tgz(24.52 MB)
    fly-7.4.1-linux-amd64.tgz.sha1(68 bytes)
    fly-7.4.1-windows-amd64.zip(24.46 MB)
    fly-7.4.1-windows-amd64.zip.sha1(70 bytes)
  • v7.5.0(Sep 17, 2021)

    IMPORTANT: This release includes a few large refactors, therefore we recommend anyone using Concourse for mission-critical workflows to wait for the next few releases just in case any edge cases are found.

    This release contains the version of github-release-resource that fixes the illegal base64 data at input errors from GitHub API's recent breaking change https://github.com/concourse/github-release-resource/issues/108.

    🚨 Breaking

    • Prefer overlay over btrfs in baggageclaim when using driver: detect (#7427) @aoldershaw :link:

      • Previously, when the baggageclaim driver was not specified, Concourse attempts to detect the supported drivers
      • The prior driver precedence is: btrfs -> overlay -> naive
      • The new driver precedence is: overlay -> btrfs -> naive
    • Allow team members to archive pipelines (#7449) @wanderanimrod :link:

      • Users with the member role on a team can now archive pipelines by default. The "archive pipeline" action was previously assigned to the owner role. If you've configured your own RBAC this change will not effect you.

    ✈️ Features

    • Removing VersionedResourceTypes from get, check and put plans (#7176) @clarafu :link:

      • This PR is mainly a refactor but there is a behavioural change that comes along with it. If a resource uses a custom resource type, its Put, Check, Get and Task steps will now always create a check for its parent custom resource type. This check will still respect the resource checking interval and the check_every of the resource type. Because of this new feature, we no longer need to explicitly check the custom resource types in lidar.
    • Add audit information for job & pipeline pauses (#7273) @rjinskidepop :link:

      • Add pipeline and job pause meta information - who and when.
    • Propagate groups between subpages of a pipeline (#7307) @clarafu :link:

      • If a user was initially viewing a group in the pipeline page, this will be persisted in the pipeline breadcrumb when navigating between pipeline subpages.
    • Optimize pipeline svg rendering (#7438) @aoldershaw :link:

      • The initial render of the pipeline page should be much faster, particularly on Chrome 92+
    • Optimize build log collection (#7327) @evanchaoli :link:

      • Optimized a SQL statement used to remove build logs. This optimization will specially benefit large deployments that have a lot of pipelines.
    • Don't query for the entire resource in the check delegate (#7474) @aoldershaw :link:

    • Simplify atc/worker package and extract runtime abstractions (#6597) @aoldershaw :link:

      • We will now error when a suitable worker does not exist rather than waiting forever.

    🐞 Bug Fixes

    • Fix opening a link to a resource causality page (#7369) @aoldershaw :link:

    • Don't allow empty identifiers when renaming pipelines/teams (#7370) @taylorsilva :link:

      • Fixed a bug where a pipeline or team could be renamed to an empty string. The team/pipeline could not be deleted through fly. An error is now returned by the API if the identifier is blank
    • Sanitize prometheus metric labels (#7423) @lrstanley :link:

      • Ensure Prometheus metric labels are valid. This resolves an issue with our bosh release, where web nodes would fail to start, due to a metric label that wasn't valid according to Prometheus.
    • Fix overlapping between inputs and jobs in UI (#7454) @xtremerui :link:

      • Fixes an edge case that might overlap an input and job node in the pipeline view.
    • Validate if a Pipeline contains a cycle (#7455) @EstebanFS :link:

      • The API will reject any pipelines that contains a cycle
    • Prevent open redirect to other hosts (#7459) @taylorsilva :link:

      • Prevent an open redirect vulnerability on the /sky/login path
    • Delete btrfs volume if it exists when using the overlay driver (#7461) @taylorsilva :link:

      • Made worker initialization more stable if you're switching from btrfs to overlay. The worker will remove the btrfs mount if it exists before creating overlay mounts
    • Fix missing label in metric concourse_steps_waiting (#7479) @Esysc :link:

      • Fix missing label in metric concourse_steps_waiting
    • Close zstd reader in load var step (#7548) @clarafu :link:

    🤷 Miscellaneous

    • Speed up TSA tests (#7336) @aoldershaw :link:

    • Don't mount Concourse source directory in integration tests (#7347) @aoldershaw :link:

    • Add baggageclaim to concourse/concourse (#7351) @taylorsilva :link:

    • Bump opentelemetry package to 1.0.0-RC2 (#7360) @taylorsilva :link:

    • Remove experimental warning for set_pipeline and load_var steps (#7396) @aoldershaw :link:

    • Skip integration downgrade test (#7398) @aoldershaw :link:

    • Skip integration upgrade test (#7401) @aoldershaw :link:

    • namespace prometheus test to avoid conflict (#7436) @xtremerui :link:

    • Fix integration upgrade/downgrade tests (#7450) @aoldershaw :link:

    • Fix DB performance regression with updating resource cache metadata (#7472) @aoldershaw :link:

    • Don't create workdir volume for check steps (#7473) @aoldershaw :link:

    📦 Bundled resource types

    Source code(tar.gz)
    Source code(zip)
    concourse-7.5.0-darwin-amd64.tgz(109.97 MB)
    concourse-7.5.0-darwin-amd64.tgz.sha1(75 bytes)
    concourse-7.5.0-linux-amd64.tgz(1290.37 MB)
    concourse-7.5.0-linux-amd64.tgz.sha1(74 bytes)
    concourse-7.5.0-windows-amd64.zip(106.06 MB)
    concourse-7.5.0-windows-amd64.zip.sha1(76 bytes)
    fly-7.5.0-darwin-amd64.tgz(24.52 MB)
    fly-7.5.0-darwin-amd64.tgz.sha1(69 bytes)
    fly-7.5.0-linux-amd64.tgz(24.64 MB)
    fly-7.5.0-linux-amd64.tgz.sha1(68 bytes)
    fly-7.5.0-windows-amd64.zip(24.81 MB)
    fly-7.5.0-windows-amd64.zip.sha1(70 bytes)
  • v6.7.8(Sep 14, 2021)

    ✈️ Features

    • Optimize build log collection (#7334 ) @evanchaoli :link:
      • Optimized a SQL statement used to remove build logs. This optimization will specially benefit large deployments that have a lot of pipelines.

    🐞 Bug Fixes

    • Prevent open redirect to other hosts (#7460) @taylorsilva :link:

    • Fix github-release-resource with graphql update (https://github.com/concourse/github-release-resource/pull/107) @kirillbilchenko :link:

    🤷 Miscellaneous

    • Backport baggageclaim v1.8.0 to release/6.7.x (#7428) @taylorsilva :link:

    • Use overlay driver for worker integration test [6.7.x] (#7435) @aoldershaw :link:

    📦 Bundled resource types

    Source code(tar.gz)
    Source code(zip)
    concourse-6.7.8-darwin-amd64.tgz(91.33 MB)
    concourse-6.7.8-darwin-amd64.tgz.sha1(75 bytes)
    concourse-6.7.8-linux-amd64.tgz(1228.37 MB)
    concourse-6.7.8-linux-amd64.tgz.sha1(74 bytes)
    concourse-6.7.8-windows-amd64.zip(87.72 MB)
    concourse-6.7.8-windows-amd64.zip.sha1(76 bytes)
    fly-6.7.8-darwin-amd64.tgz(19.99 MB)
    fly-6.7.8-darwin-amd64.tgz.sha1(69 bytes)
    fly-6.7.8-linux-amd64.tgz(20.13 MB)
    fly-6.7.8-linux-amd64.tgz.sha1(68 bytes)
    fly-6.7.8-windows-amd64.zip(20.25 MB)
    fly-6.7.8-windows-amd64.zip.sha1(70 bytes)
  • v7.4.0(Jul 29, 2021)

    ✈️ Features

    • Fly clear-resource-cache command (#7003) @EstebanFS :link:

      • Added fly command clear-resource-cache, you could use this following the next format fly -t ci clear-resource-cache -r pipeline/resource [--version some:version]
    • Build page shows name of who triggered the build in header line of build page (#7112) @evanchaoli :link:

      • The build page now shows the username of who triggers the build if the build is triggered manually.
    • Add page to view all builds/resource versions downstream/upstream from a root resource version (#7125) @chenbh :link:

      • Disabled by default since computing causality for large datasets can be expensive, use --enable-resource-causality or $CONCOURSE_ENABLE_RESOURCE_CAUSALITY=true to enable the web UI and API endpoint.
        • Most datasets (like the merge commit for this PR) have < 100 builds and/or resource versions and take < 100ms, but it's possible for some "slow paced" resource versions (i.e. very infrequent new versions) to generate extremely large datasets
        • There is an automatic cutoff at 5000 builds or 25000 resource versions. On our deployment, the call for our slowest paced resource took about ~7 seconds to process, most of which is spent in the DB query
      • The causality page can be navigated to from the resource page Screen Shot 2021-06-03 at 11 37 08 AM
      • The causality page displays all the builds and resource versions that was generated from (downstream) or resulted in (upstream) the creation of a particular resource version Screen Shot 2021-06-03 at 11 25 03 AM
      • The downstream graph will put the root resource version on the left whereas the upstream graph will put it on the right
      • It takes into account all the intermediate resource versions when computing the final graph. In the picture above, while the resource page only shows that git version: 123 is a direct input to integrate #4 & #5, there is also an indirect link from git version: 123 -> test #19 -> ... -> intermediate-3 version:123 -> integrate #6 & #6.1
    • Support soft policy enforcement (#7139) @evanchaoli :link:

      • This feature doesn't break the existing OPA policy check. If you have enabled OPA policy check, and you don't need "soft" policy enforcement, then you just don't need to do any configuration change.
      • 3 new ATC cli options are added:
        • CONCOURSE_OPA_RESULT_ALLOWED_KEY: specifies a key of allow flag in OPA returned result
        • CONCOURSE_OPA_RESULT_SHOULD_BLOCK_KEY: specifies a key of should-block flag in OPA returned result
        • CONCOURSE_OPA_RESULT_MESSAGES_KEY: specifies a key of messages in OPA returned result

      For example, if OPA returns the following result:

      {
          "result": {
              "allow": true,
              "block": true,
              "reasons": ["foo", "bar"]
          }
      }
      

      then CONCOURSE_OPA_RESULT_ALLOWED_KEY should be set to result.allow; CONCOURSE_OPA_RESULT_SHOULD_BLOCK_KEY should be result.block, and CONCOURSE_OPA_RESULT_MESSAGES_KEY should be result.reasons.

      NOTE: allow and block in OPA result should be boolean type, because it's easy to convert other types to boolean in an OPA policy.

    • Add ability to comment on a build (#7147) @multimac :link:

      • You can now leave comments on builds. For instance, this can be used to give context to your coworkers about why a particular build failed: Screen Shot 2021-06-30 at 5 40 45 PM

      • If a build has a comment, it is displayed with a small marker to help you quickly find builds of interest. Hovering over the build displays a portion of the comment: Screen Shot 2021-06-30 at 5 41 52 PM

    • Add teamName to concourse_steps_wait_duration metrics (#7154) @Esysc :link:

    • Use browser cache API for dashboard caching (#7247) @aoldershaw :link:

      • The cached API responses on the dashboard no longer need to get truncated, which was previously introduced to work around localStorage limits
    • Allow interpolation in the across step values (#7252) @aoldershaw :link:

      • The across step now supports dynamic interpolation of values. For instance, this can be combined with the set_pipeline step and instanced pipelines to set a dynamic list of pipelines:
        - load_var: branches
          file: branches/branches.json
        - across:
          - var: branch
            values: ((.:branches))
          set_pipeline: my-app
          file: ci/pipelines/my-app.yml
          instance_vars: {branch: ((.:branch))}
        
    • Cache the list of workers in memory (#7268) @aoldershaw :link:

      • Scheduling containers should be more performant by reducing the number of required database calls
    • Optimize build log collector (#7327) @evanchaoli :link:

      • Optimized a SQL statement used to remove build logs. This optimization will specially benefit large deployments that have a lot of pipelines.
    • Enable emitting dogstatsd metrics over uds (#7338) @jmhwang7 :link:

      • The Datadog emitter can now be configured to communicate with the Datadog agent over Unix Domain Sockets

    🐞 Bug Fixes

    • containerd: properly populate /etc/hosts and /etc/hostname (#7041) @muntac :link:

      • containerd: /etc/hosts and /etc/hostname are correctly populated
    • Handle 403 for vault preflight check of V2 (#7057) @xtremerui :link:

    • atc: across step logs errors (#7090) @taylorsilva :link:

      • Across step emits an error event when one of the sub-steps errors
    • containerd: Mount /dev/fuse to privileged containers (#7098) @aoldershaw :link:

    • atc(fix): fixed a bug in resource check rate limiter. (#7102) @evanchaoli :link:

      • Fixed a bug in check rate limiter that caused slow checks.
    • fix BaseResourceType for streamed volumes (#7108) @vito :link:

    • Fix worker restart issue with containerd daemon and beacon (#7113) @muntac :link:

      • Fix worker stall issue when restarting with containerd. Exit the worker's beacon process gracefully if any other top level process like the containerd daemon fails. Wait for containerd daemon to come up before starting the containerd Garden server.
    • Fix memory leak in notification bus (#7120) @aoldershaw :link:

    • containerd: default to root if /etc/passwd is missing (#7124) @aoldershaw :link:

      • Fixes a regression introduced in 7.3.0 that prevented containers that don't have an /etc/passwd file from running
    • Fix algorithm considering reruns as new builds (#7144) @taylorsilva :link:

      • Fixes pipelines getting stuck with the same inputs when a job upstream of a job with version: every succeeds and is rerun
    • containerd: keep tasks running after concourse worker restarts gracefully (#7148) @aoldershaw :link:

      • The containerd runtime is now more resilient to the concourse worker process gracefully restarting (e.g. via monit restart)
        • Tasks that were started prior to restart will continue to run when the worker process comes back up
        • This matches the behaviour of the Guardian runtime
    • Fixed build log reaper not respecting when both Days and Builds are set (#7179) @EstebanFS :link:

      • The build log reaper has two options for determining when to reap logs. Before, if both of the options are set, it would reap if either of the two options were true, rather than requiring both of them to be satisfied
    • Apply a minimum rate limit for resource checking (#7218) @aoldershaw :link:

      • If CONCOURSE_MAX_CHECKS_PER_SECOND is unset, Concourse will try to distribute checks evenly over the course of the check interval to reduce the concurrent load on external systems.
      • If there are few resources in a Concourse deployment (~1-20), checks may have to wait a substantial amount of time to run in order to space the checks out evenly. However, there's no real benefit to doing this, since having just a few resources doesn't cause significant load in the first place.
      • Now, Concourse ensures that at least one check is allowed to run per second
    • atc/db: prevent creation of duplicate check builds (#7221) @taylorsilva :link:

      • Prevent duplicate checks from being created for a single resource
    • Fix browser back button after selecting a group (#7249) @aoldershaw :link:

      • Previously, if a pipeline group was selected in the UI, the back button would not work (you'd have to press it twice to go back)
    • set_pipeline unpauses previously archived pipelines (#7255) @aoldershaw :link:

      • When an archived pipeline is un-archived via the set_pipeline step, it will be unpaused
    • GC task caches belonging to archived pipelines (#7272) @aoldershaw :link:

    • containerd: Clean up networking files in /tmp (#7276) @taylorsilva :link:

      • Fixed a bug where the containerd runtime would create networking related files under /tmp and never delete them. They are now made under the --work-dir set for the worker and are cleaned up when the container is deleted. You can delete any lingering network files under your workers /tmp directory after upgrading.
    • Fix prometheus emitter not setting default attributes (#7294) @chenbh :link:
      Additional metrics attributes configured by --metrics-attribute now propagates to the prometheus emitter correctly.

    • run check builds GC in batch (#7323) @xtremerui :link:

    🤷 Miscellaneous

    • Cleanup gomod and skip building fly by default in Dockerfile (#7058) @chenbh :link:

    • topgun: update regex for capturing instances (#7064) @taylorsilva :link:

    • containerd: update config to v2 format (#7078) @muntac :link:

    • [topgun/k8s] disable container limits failure test (#7087) @aoldershaw :link:

    • [topgun/k8s] disable container limits fail test (#7088) @aoldershaw :link:

    • use ip command instead of ifconfig in MTU test (#7089) @aoldershaw :link:

    • Merge 7.3.x branch into master (#7097) @aoldershaw :link:

    • fix go.sum (#7126) @aoldershaw :link:

    • [release/7.3.x] fix go.sum (#7127) @chenbh :link:

    • Move garden config tests to integration suite (#7135) @aoldershaw :link:

    • integration: add retries to vault initialization (#7142) @aoldershaw :link:

    • integration: fix package name (#7143) @aoldershaw :link:

    • Update README to point to GitHub discussions (#7159) @mthaddon :link:

    • fly: add --team flag to checklist (#7162) @tech-geek29 :link:

    • Reduce number of JOINs in builds query (#7184) @aoldershaw :link:

    • Treat resource types as checkable in rate limiter (#7211) @taylorsilva :link:

    • Remove prototype_id from builds table (#7220) @aoldershaw :link:

    • k8s/topgun: use regex to match error message (#7226) @taylorsilva :link:

    • Note that all workers need to be on the same network for p2p (#7227) @taylorsilva :link:

    • Revert "worker: make containerd the default runtime" (#7235) @taylorsilva :link:

    • Left-align job name in build header (#7236) @aoldershaw :link:

    • web: behavior: Fix snake_case method "button_tooltip" (#7238) @multimac :link:

    • Don't include check containers in worker cache (#7275) @aoldershaw :link:

    • containerd: split long property values into multiple chunks (#7288) @aoldershaw :link:

    • [containerd integration] Make host IP parsing more robust (#7293) @aoldershaw :link:

    • Run dependabot at midnight UTC (#7295) @chenbh :link:

    • Properly map version_from within across substep (#7310) @aoldershaw :link:

    • Update template (#7341) @taylorsilva :link:

    • Fix dogstatsd UDS file configuration (#7343) @aoldershaw :link:

    📦 Bundled resource types

    Source code(tar.gz)
    Source code(zip)
    concourse-7.4.0-darwin-amd64.tgz(110.56 MB)
    concourse-7.4.0-darwin-amd64.tgz.sha1(75 bytes)
    concourse-7.4.0-linux-amd64.tgz(789.79 MB)
    concourse-7.4.0-linux-amd64.tgz.sha1(74 bytes)
    concourse-7.4.0-windows-amd64.zip(106.44 MB)
    concourse-7.4.0-windows-amd64.zip.sha1(76 bytes)
    fly-7.4.0-darwin-amd64.tgz(24.72 MB)
    fly-7.4.0-darwin-amd64.tgz.sha1(69 bytes)
    fly-7.4.0-linux-amd64.tgz(24.82 MB)
    fly-7.4.0-linux-amd64.tgz.sha1(68 bytes)
    fly-7.4.0-windows-amd64.zip(24.79 MB)
    fly-7.4.0-windows-amd64.zip.sha1(70 bytes)
  • v6.7.7(Jul 27, 2021)

    ✈️ Features

    • Optimize build log collector (#7334) @evanchaoli :link:
      • Optimized a SQL statement used to remove build logs. This optimization will specially benefit large deployments that have a lot of pipelines.

    🐞 Bug Fixes

    • Add autocomplete=off to all form tags (#6921) @taylorsilva :link:

      • add `autocomplete="off" to the form and username tags on the login page
    • Fix memory leak in notification bus (#7157) @taylorsilva :link:

    🤷 Miscellaneous

    • Bump otel to 0.20.0 (#7305) @xtremerui :link:
      • Bump opentelemetry to v0.20.0 to address CVE in one of its dependancies (apache/thrift)

    📦 Bundled resource types

    Source code(tar.gz)
    Source code(zip)
    concourse-6.7.7-darwin-amd64.tgz(92.25 MB)
    concourse-6.7.7-darwin-amd64.tgz.sha1(75 bytes)
    concourse-6.7.7-linux-amd64.tgz(710.42 MB)
    concourse-6.7.7-linux-amd64.tgz.sha1(74 bytes)
    concourse-6.7.7-windows-amd64.zip(88.68 MB)
    concourse-6.7.7-windows-amd64.zip.sha1(76 bytes)
    fly-6.7.7-darwin-amd64.tgz(20.21 MB)
    fly-6.7.7-darwin-amd64.tgz.sha1(69 bytes)
    fly-6.7.7-linux-amd64.tgz(20.33 MB)
    fly-6.7.7-linux-amd64.tgz.sha1(68 bytes)
    fly-6.7.7-windows-amd64.zip(20.49 MB)
    fly-6.7.7-windows-amd64.zip.sha1(70 bytes)
  • v7.3.1(May 28, 2021)

  • v7.3.0(May 25, 2021)

    🚨 Breaking

    • Bump opentelemetry to 0.19.0 (#6787) @aoldershaw :link:

      • The service name Honeycomb tracing exporter is now configured via the more general --tracing-service-name (CONCOURSE_TRACING_SERVICE_NAME) rather than --tracing-honeycomb-service-name (CONCOURSE_TRACING_HONEYCOMB_SERVICE_NAME)

    ✈️ Features

    • Cache streamed volumes and use local cache when looking for volumes (#6660) @evanchaoli :link:
      Optimize resource cache streaming and get step.

      • Mark streamed resource cache volumes as resource cache, to avoid duplicate streaming in next runs.
      • If a resource from a get can be found on some workers, then get step will do nothing. This will reduce times of Concourse connecting to external systems, such as git, docker hub, and so on.
      • This feature is currently opt-in and can be enabled using CONCOURSE_ENABLE_CACHE_STREAMED_VOLUMES flag.
    • Re-ordering instanced pipelines (#6830) @EstebanFS :link:

      • Instanced Pipelines are allowed to be re-ordered with in their group through the UI (using the drag and drop functionality) or using the fly command: fly -t dev oip -g groupName -p key1:var1 -p key2:var2
    • Enhance syslog-drainer to make it more useful (#6834) @SimonXming :link:

      • Add event_id into syslog-drainer entries, to get the correct order of "drained" build logs.
      • Add more supported event_type for syslog-drainer to include more info for "drained" build logs.
    • Enhance webhook triggered checks (#6854) @evanchaoli :link:

      • When multiple pipelines hold a common resource and webhook calls against the common resource, checks are sent to all pipelines at same time. Without this enhancement, each webhook call will cause a check to run. With this enhancement, only a single check will run, which is the expected behavior as a global resource.
    • Allow override of container limits in task config (#6867) @BooleanCat :link:

      • Pipeline authors can now set container_limits for reusable tasks in pipelines. Any limits set in the pipeline will override the limits set within the reusable task file.
    • Use cursor-based pagination for build events (#6873) @aoldershaw :link:

      • Optimizes fetching build logs from the DB for builds with massive logs
    • Use display_user_id field to render username in web interface (#6970) @logyball :link:

    • Set Content-Security-Policy and Cache-Control Headers (#6949) @taylorsilva :link:

      • A Content-Security-Policy header is now set with a default value that will block framing of the Concourse web UI. This was already possible with the default value of the X-Frames-Option header.
        • The CSP header value is configurable with CONCOURSE_CONTENT_SECURITY_POLICY
      • A Cache-Control header is set on every page with a default value of no-store, private. The value of the header is overwritten for some paths (i.e. web assets)

    🐞 Bug Fixes

    • Ensure stdin never errors when using containerd with TTY enabled (#6791) @chenbh :link:

      • Fixed bug with containerd runtime where builds to error out if it runs for a long time without any output
    • Add trigger for deleting pipeline (#6880) @xtremerui :link:

      • Fix a bug that might leave orphan pipeline_build_events_* table in DB when deleting a team. Pipelines belong to the deleted team will be destroyed by DELETE CASCADE but associated events table was not cleaned up properly.
    • Fix volume GC query to not include volumes with children (#6902) @xtremerui :link:

      • Fix query that causes volume cannot be destroyed as children are present in web and update or delete on table "volumes" violates foreign key constraint "volumes_parent_id_fkey" in DB.
    • Set autocomplete to off for login form (#6920) @taylorsilva :link:

      • add autocomplete="off" to the top-level form and username tags.
    • Scan unchecked resource-types (#6923) @EstebanFS :link:

      • Fixed an edge case where a put-only resource's parent-type would not be checked
    • Ignore "not found" error on process deletion for Containerd runtime (#6959) @aoldershaw :link:

    • worker: Set PATH based on UID instead of container's privileged state (#6982) @taylorsilva :link:

      • Containerd: fixed a bug where PATH did not contain directories to system tools (i.e. /sbin) when a user/process was root. Only effects unprivileged containers.
    • Fix Postgres deadlock when frequently setting pipelines (#7011) @aoldershaw :link:

    • containerd: allow use of non-existent uids (#7029) @muntac :link:

      • containerd supports running images with non-existent UIDs such as distroless images.

    🤷 Miscellaneous

    • Add exception handling in bigint migration (#6848) @xtremerui :link:

    • add help text for password connector flag (#6876) @aoldershaw :link:

    • skip DNS proxy test with extra DNS server (#6878) @aoldershaw :link:

    • Optimise fake generation (#6885) @BooleanCat :link:

    • Refactor: Pick -> Approve (#6886) @taylorsilva :link:

    • Optimise fake generation (#6901) @BooleanCat :link:

    • re-enable k8s dns proxy test (#6906) @chenbh :link:

    • atc: fix asset leak in api tests (#6918) @vito :link:

    • web/wats: replace deprecated waitFor usage (#6922) @vito :link:

    • Correct a typo in project documentation (#6925) @plan-do-break-fix :link:

    • topgun/k8s: move dns proxy tests to integration (#6947) @chenbh :link:

    • Don't check resource-types from paused pipelines (#6961) @taylorsilva :link:

    • Add drills environment to major release template (#6967) @clarafu :link:

    • Using osFlag to fix windows worker error (#6971) @EstebanFS :link:

    • contributing: cover governance model, be brief (#6972) @vito :link:

    • [skip-migrations-check] bump secondary_order migration (#6979) @aoldershaw :link:

    • .github: set up security scanning action (#6992) @vito :link:

    • Fix bugs related to caching streamed volumes (#7001) @aoldershaw :link:

    • Fix caching when streamed volume was also streamed (#7024) @aoldershaw :link:

    • Upgraded xenial to bionic stemcell (#7037) @EstebanFS :link:

    • 7.3.x: make resource cache streaming opt-in (#7051) @taylorsilva :link:

    • 7.3.x: Fix capture of failing topgun tests logs (#7055) @taylorsilva :link:

    • 7.3.x: update regex for capturing instances (#7063) @taylorsilva :link:

    📦 Bundled resource types

    Source code(tar.gz)
    Source code(zip)
    concourse-7.3.0-darwin-amd64.tgz(109.83 MB)
    concourse-7.3.0-darwin-amd64.tgz.sha1(75 bytes)
    concourse-7.3.0-linux-amd64.tgz(716.28 MB)
    concourse-7.3.0-linux-amd64.tgz.sha1(74 bytes)
    concourse-7.3.0-windows-amd64.zip(105.64 MB)
    concourse-7.3.0-windows-amd64.zip.sha1(76 bytes)
    fly-7.3.0-darwin-amd64.tgz(24.66 MB)
    fly-7.3.0-darwin-amd64.tgz.sha1(69 bytes)
    fly-7.3.0-linux-amd64.tgz(24.77 MB)
    fly-7.3.0-linux-amd64.tgz.sha1(68 bytes)
    fly-7.3.0-windows-amd64.zip(24.75 MB)
    fly-7.3.0-windows-amd64.zip.sha1(70 bytes)
  • v7.2.0(Apr 14, 2021)

    🚨 Breaking

    • Wait for worker matching strategy when scheduling build steps (#6635) @multimac :link:
      • Previously, if no workers satisfied the container placement strategy for a step (with the exception of task steps when using the limit-active-tasks placement strategy), the step would simply error the build
      • Now, all steps will wait for a worker to become available
      • The metric concourse_tasks_waiting was removed and replaced with concourse_steps_waiting{type="task"}

    ✈️ Features

    • Add ability to navigate to resources page from build page (#6662) @chenbh :link:
      UI: clicking on the version text for a get/put step in the Build page will now navigate directly to the Resource page with the corresponding version expanded

    • Allow using LDAP as a password connector (#6671) @aoldershaw :link:

      • By setting --password-connector ($CONCOURSE_PASSWORD_CONNECTOR) to ldap, you can authenticate to Concourse with fly login -u ... -p ... using your LDAP credentials
        • Enabling this feature prohibits the use of local users
      • If you use an attribute other than username for authenticating with LDAP (e.g. email address), you can now configure --username-prompt ($CONCOURSE_USERNAME_PROMPT) to change the help text when logging in via the UI
    • Optimize check creation in DB (#6845) @aoldershaw :link:

    • Add DB index to optimize paginating job builds (#6871) @aoldershaw :link:

    • enhance put.inputs detect to ignore prefixed . and .. (#6705) @evanchaoli :link:

      • input: detect now can handle paths prefixed by . and ...

    🐞 Bug Fixes

    • Fix empty worker tags (#6057) @aholyoake-bc :link:

    • runtime: check if swap limits is enabled (#6652) @taylorsilva :link:

      • The containerd runtime will conditionally set memory swap limits if it detects that memory swap limits are enabled
    • runtime: timeout set to 0 means there is no timeout (#6655) @EstebanFS :link:

      • When CONCOURSE_CONTAINERD_REQUEST_TIMEOUT is set to 0 that means there is no timeout
    • feat(atc): add check build metrics. (#6656) @evanchaoli :link:

      • Fixed metrics BuildsStarted, BuildsRunning, BuildStarted, BuildFinsished to exclude check builds.
      • Added check build metrics: CheckBuildsStarted, CheckBuildsRunning, CheckBuildStarted, CheckBuildFinsished
    • better handling for containerd error message (#6668) @muntac :link:

      • Fixed a bug with the containerd runtime where gracefully stopping a container might have failed with an unhandled error. Now it gracefully shuts down.
    • Prevent UI from stalling when you keep the resource page open for a while (#6703) @aoldershaw :link:

    • move migration table updating SQL into a migration transaction (#6727) @xtremerui :link:
      Fix a bug where a completed migration was not recorded in migrations_history table

    • Build image resource caches foreign key constraint to job ids should be on delete cascade (#6757) @clarafu :link:

      • This change fixes a bug that was introduced in v7.1.0 where deleting a pipeline could possibly result in a 500 error. This was caused by a foreign key constraint within the build_image_resource_caches table referencing a job in the jobs table.
    • Fix race condition in containerd runtime resulting in lost output for quickly printing-then-exiting processes (#6776) @vito :link:

    • update check metrics comments. (#6858) @evanchaoli :link:

      • Just update code comments, no release impact.

    🤷 Miscellaneous

    • Bump dex to 0.4.0 and remove pkger (#6669) @aoldershaw :link:

    • github config updates (#6672) @vito :link:

    • Add "misc" label to dependabot (#6700) @chenbh :link:

    • fix go mod (#6716) @aoldershaw :link:

    • more lenient context deadline checking for containerd graceful process termination (#6717) @aoldershaw :link:
      Very rarely graceful shutdowns will return a context timeout error instead of gracefully shutting down.

    • fix font antialiasing issue due to less dependency bump (#6739) @aoldershaw :link:

    • Don't enforce step timeout during worker selection (#6760) @aoldershaw :link:

    • Avoid task specific error in load_var file artifact look-up (#6829) @kjgorman :link:

    • remove accidentally committed sql in migration (#6841) @xtremerui :link:

    • add release/undocumented labels to dependabot (#6842) @chenbh :link:

    • .github: add template for rfc tracking issue (#6844) @vito :link:

    • Remove unused ci folders (#6870) @taylorsilva :link:

    • [release/7.2.x] fast-forward (#6875) @chenbh :link:

    • [release/7.2.x] add help text for password connector flag (#6877) @aoldershaw :link:

    📦 Bundled resource types

    Source code(tar.gz)
    Source code(zip)
    concourse-7.2.0-darwin-amd64.tgz(111.01 MB)
    concourse-7.2.0-darwin-amd64.tgz.sha1(75 bytes)
    concourse-7.2.0-linux-amd64.tgz(712.49 MB)
    concourse-7.2.0-linux-amd64.tgz.sha1(74 bytes)
    concourse-7.2.0-windows-amd64.zip(107.04 MB)
    concourse-7.2.0-windows-amd64.zip.sha1(76 bytes)
    fly-7.2.0-darwin-amd64.tgz(24.83 MB)
    fly-7.2.0-darwin-amd64.tgz.sha1(69 bytes)
    fly-7.2.0-linux-amd64.tgz(24.92 MB)
    fly-7.2.0-linux-amd64.tgz.sha1(68 bytes)
    fly-7.2.0-windows-amd64.zip(25.16 MB)
    fly-7.2.0-windows-amd64.zip.sha1(70 bytes)
  • v6.7.6(Mar 29, 2021)

    🐞 Bug Fixes

    • backport #6197: Prevent retrying on worker error when build is aborted (#6598) @evanchaoli :link:

    • Bump lib/pq to 1.10.0 which fixes a regression in lib/pq where under certain circumstances the driver would not drop dead connections and never recover. (#6746) @taylorsilva :link:

    • Fix a panic in the New Relic metrics emitter (#6747) @taylorsilva :link:

    🤷 Miscellaneous

    • Fix unit test after go 1.16 (#6553) @chenbh :link:

    • 6.7 remove packr backport (#6585) @xtremerui :link:

    • switch base_image build arg to lowercase (#6754) @aoldershaw :link:

    📦 Bundled resource types

    Source code(tar.gz)
    Source code(zip)
    concourse-6.7.6-darwin-amd64.tgz(88.69 MB)
    concourse-6.7.6-darwin-amd64.tgz.sha1(75 bytes)
    concourse-6.7.6-linux-amd64.tgz(790.30 MB)
    concourse-6.7.6-linux-amd64.tgz.sha1(74 bytes)
    concourse-6.7.6-windows-amd64.zip(85.19 MB)
    concourse-6.7.6-windows-amd64.zip.sha1(76 bytes)
    fly-6.7.6-darwin-amd64.tgz(19.36 MB)
    fly-6.7.6-darwin-amd64.tgz.sha1(69 bytes)
    fly-6.7.6-linux-amd64.tgz(19.47 MB)
    fly-6.7.6-linux-amd64.tgz.sha1(68 bytes)
    fly-6.7.6-windows-amd64.zip(19.64 MB)
    fly-6.7.6-windows-amd64.zip.sha1(70 bytes)
  • v7.1.0(Mar 16, 2021)

    ✈️ Features

    • Allow favoriting instance groups (#6465) @aoldershaw :link:

    • Start non-privileged containers in their own cgroup namespace (#6492) @muntac :link:

    • Change SideBar "menu" icon (#6516) @chenbh :link:

      • Updated the visuals for the button to open and close the sidebar
    • Adjust spacing and padding for elements in pipeline card view in Dashboard (#6539) @xtremerui :link:

    • Show warning for pipelines configured with 'set_pipeline' step (#6621) @Infra-Red :link:

      • fly set-pipeline now prints warning message when the pipeline has already been configured through a set_pipeline step.
    • Bump baggageclaim to v1.11.0 (#6643) @taylorsilva :link:

      • Privileged container initialization will be much faster for workers using OverlayFS as the baggageclaim driver and if their kernel supports OverlayFS's metacopy feature

    🐞 Bug Fixes

    • Skip build log reaping process for paused jobs (#6573) @aoldershaw :link:

    • Fix reaped link in UI (#6579) @aoldershaw :link:

    • containerd: fix mount issues with certain images (#6592) @aoldershaw :link:

      • Fix an issue on the containerd runtime where processes fail to run with certain container images
    • Check parent resource types of resources that have set check_every: never (#6603) @taylorsilva :link:

      • Resources that had check_every: never who's type was defined in resource_types in their pipeline, would fail to check because the parent resource type would never be checked
    • Bump elm-ansi to support 8-bit and 24-bit ANSI colors (#6605) @aoldershaw :link:

      • Fixes a bug where ANSI escape codes for 8-bit/24-bit colors were misinterpreted, resulting in build logs blinking and other peculiarities
    • Only interpolate static vars when it does not contain a source (#6619) @chenbh :link:

      • Fixed bug where static vars from fly set-pipeline -v ... -y ... were interpolated into local vars ((.:var))
    • containerd: infer MTU from host's network interface (#6624) @aoldershaw :link:

      • In prior versions of Concourse, the Containerd runtime always set the MTU of the container bridge network to the system default
      • Now, the Containerd matches Guardian's behavior by:
        • Detecting the external IP of the host (can be set explicitly using CONCOURSE_CONTAINERD_EXTERNAL_IP)
        • Extracting the MTU from the network interface corresponding with that IP (can be set explicitly using CONCOURSE_CONTAINERD_MTU)

    🤷 Miscellaneous

    • Cache streamed volumes and try to get by looking for local cache (#6495) @evanchaoli :link:

      • was reverted https://github.com/concourse/concourse/pull/6659 due to multiple bugs found in testing
    • Fix unit test after go 1.16 (#6545) @chenbh :link:

    • Switch migrations + web assets to Go 1.16 embedding (#6550) @vito :link:

    • Cleanup from staticcheck (#6561) @taylorsilva :link:

    • Update fake files generated by latest version of counterfeiter. (#6564) @evanchaoli :link:

    • Default to containerd in docker-compose.yml (#6580) @aoldershaw :link:

    • Bump elliptic from 6.5.3 to 6.5.4 (#6653) @dependabot :link:

    • Revert "feat(atc): cache streamed volumes and try to get by looking for local cache" (#6659) @clarafu :link:

    📦 Bundled resource types

    Source code(tar.gz)
    Source code(zip)
    concourse-7.1.0-darwin-amd64.tgz(102.44 MB)
    concourse-7.1.0-darwin-amd64.tgz.sha1(75 bytes)
    concourse-7.1.0-linux-amd64.tgz(706.22 MB)
    concourse-7.1.0-linux-amd64.tgz.sha1(74 bytes)
    concourse-7.1.0-windows-amd64.zip(98.69 MB)
    concourse-7.1.0-windows-amd64.zip.sha1(76 bytes)
    fly-7.1.0-darwin-amd64.tgz(22.69 MB)
    fly-7.1.0-darwin-amd64.tgz.sha1(69 bytes)
    fly-7.1.0-linux-amd64.tgz(22.81 MB)
    fly-7.1.0-linux-amd64.tgz.sha1(68 bytes)
    fly-7.1.0-windows-amd64.zip(23.00 MB)
    fly-7.1.0-windows-amd64.zip.sha1(70 bytes)
  • v7.0.0(Feb 16, 2021)

    🚨 Breaking

    • Run checks as builds (#6022) @vito :link:

      • Breaking change: unique_version_history can no longer be configured on resource types. No one seemed to be using it, and it made internal architecture unnecessarily complicated. The need for it should go away entirely as we make progress on the v10 roadmap.
      • Resource check operations, which collect and save versions for pipeline resources, are now run as builds.
        • This is largely an internal architecture refactor, but it also improves UX - check output can now be viewed on the resource page!
      • fly check-resource and fly check-resource-type now stream the checking output to the user, just like fly watch and fly trigger-job.
      • This change includes a migration to convert id column of the builds table and all tables referencing build_id to a bigint. This is unfortunately a slow migration, so please anticipate downtime proportional to the amount of builds in your database.
        • If the migration fails with deadlock detected, shut down the other web nodes first.
        • Our large-ish scale test environment took about an hour.
    • Remove aggregate step (#6349) @taylorsilva :link:

      • Removing the aggregate step as planned. It is succeeded by the in_parallel step.

    ✈️ Features

    • The formerly-experimental containerd runtime is now GA and is considered ready for production use :link:

      • We will be changing the default container runtime from Guardian to containerd in coming releases, but we encourage using the containerd runtime ASAP
      • To enable the containerd runtime, set --runtime ($CONCOURSE_RUNTIME) to containerd on the concourse worker command
      • You will also need to convert any --garden-* ($CONCOURSE_GARDEN_*) flags to their containerd counterparts:
        • --garden-request-timeout ($CONCOURSE_GARDEN_REQUEST_TIMEOUT) -> --containerd-request-timeout ($CONCOURSE_CONTAINERD_REQUEST_TIMEOUT)
        • --garden-dns-proxy-enable ($CONCOURSE_GARDEN_DNS_PROXY_ENABLE) -> --containerd-dns-proxy-enable ($CONCOURSE_CONTAINERD_DNS_PROXY_ENABLE)
        • --garden-network-pool ($CONCOURSE_GARDEN_NETWORK_POOL) -> --containerd-network-pool ($CONCOURSE_CONTAINERD_NETWORK_POOL)
        • --garden-max-containers ($CONCOURSE_GARDEN_MAX_CONTAINERS) -> --containerd-max-containers ($CONCOURSE_CONTAINERD_MAX_CONTAINERS)
        • $CONCOURSE_GARDEN_DENY_NETWORKS -> --containerd-restricted-network ($CONCOURSE_CONTAINERD_RESTRICTED_NETWORK)
        • $CONCOURSE_GARDEN_DNS_SERVER -> --containerd-dns-server ($CONCOURSE_CONTAINERD_DNS_SERVER)
      • If you rely on any Garden config that is not yet supported on our containerd runtime, please open an issue
    • Perform image fetching using check/get sub-steps (#6153) @vito :link:

      • Image fetching for resources and resource types is now handled explicitly in the build plan using check and get steps, and can be inspected in the UI

      image

    • Show resource check build output in web UI (#6137) @vito :link:

    • Enforce SetPipeline policy check in set_pipeline step (#5932) @cludden :link:

      • When OPA integration is enabled, the set_pipeline step now respects the same policy check as fly set-pipeline
    • Speed up database queries by adding a job_id column to build image resource caches table and adding an index for ordering builds of a job (#5993) @clarafu :link:

    • Allow globs in groups (#6060) @andy-paine :link:

      • groups in a pipeline can now match jobs based on globs e.g.:
        groups:
        - name: deploy
          jobs:
          - deploy-*
        
    • Add flag to concourse worker to overwrite init binary path for the containerd runtime (#6086) @chenbh :link:

      • The init binary can be configured using the --containerd-init-bin flag ($CONCOURSE_CONTAINERD_INIT_BIN)
    • Make CNI plugins directory configurable for the containerd runtime (#6120) @muntac :link:

      • CNI plugins directory can be configured using the --containerd-cni-plugins-dir flag ($CONCOURSE_CONTAINERD_CNI_PLUGINS_DIR)
    • Fallback fly intercept to sh when bash is missing (#6098) @shua :link:

      • If no command is specified,fly intercept will first try to use bash for an interactive shell, but if the container returns an error indicating bash is not available, fly will fallback to the more common (but more limited) sh
      • If this fallback logic is not desired, the user can explicitly specify bash as the path argument to the fly intercept command
    • Add Honeycomb.io as optional tracing backend (#6103) @spire-allyjweir :link:

    • [experimental] Group instanced pipelines on UI (#6105) @aoldershaw :link:

      • Instanced pipelines (RFC) provide a mechanism for constructing multiple instances of a pipeline template that differ by some parameters
        • e.g. to support multiple release lines, you may have a collection of instanced pipelines called release that differ by the version line (1.0.x, 1.1.x, 2.0.x, etc.)
      • All instanced pipelines with the same name (but different parameters) will be collected in the UI into a grouping of related pipelines, removing clutter from the dashboard when there are many instances of a pipeline template
      • Instanced pipelines are currently experimental until we work out the UX, but if you'd like to play around with them, you can set the flag --enable-pipeline-instances ($CONCOURSE_ENABLE_PIPELINE_INSTANCES)
    • Update go module dependencies [go.opentelemetry.io/otel] (#6106) @christophermancini :link:

    • Implement support for Vault KV v2 backends (#6115) @daviddob :link:

    • add support for exporting traces via OTLP (#6122) @christophermancini :link:

      • Added support for OTLP as a target for traces to be exported to
    • Add index to speed up build deletion, fix up a few issues with checks as builds (#6125) @vito :link:

    • Add --team flag to fly order-pipelines command (#6132) @witjem :link:

    • Add --team option to fly get-pipeline command (#6144) @techgaun :link:

    • Add --team option to fly expose-pipeline command (#6169) @techgaun :link:

    • Ensure pipelines contain at least one job (#6159) @taylorsilva :link:

      • Pipelines are now validated to ensure that they contain at least one job - pipeline configs with no jobs will be rejected
    • set_pipeline step prints 'no changes to apply' (#6164) @mdb :link:

      • set_pipeline now prints "no changes to apply" and thereby behaves similarly to fly set-pipeline when a pipeline config contains no changes.
    • Update colours and contrast (#6168) @jomsie :link:

    • Experimental support for P2P Volume Streaming (#6186) @evanchaoli :link:

      • Support P2P volume streaming directly between two workers instead of through the ATC.
        • This is an opt-in feature enabled with --enable-p2p-volume-streaming or env var $CONCOURSE_ENABLE_P2P_VOLUME_STREAMING on the web nodes. When this feature is enabled, --baggageclaim-bind-ip on workers should be set to 0.0.0.0 so that baggage claim can be accessed from another workers.
        • This should only be used for clusters where all workers can reach each other on the same local network.
        • Adds --baggageclaim-p2p-interface-name-pattern and --baggageclaim-p2p-interface-family to the worker command.
    • Add a new metric "volumes streamed" (#6187) @evanchaoli :link:

    • Log the worker name when creating a container fails (#6188) @evanchaoli :link:

    • Support chained container placement strategies. (#6208) @evanchaoli :link:

      • Enhanced container placement strategy to support chained strategies, for example CONCOURSE_CONTAINER_PLACEMENT_STRATEGY=volume-locality,fewest-build-containers
    • Add new container placement strategies: limit-max-containers and limit-max-volumes (#6339) @evanchaoli :link:

      • These strategies prevent scheduling on workers that already have too many containers or volumes on them (respectively), according to a limit set by --max-active-containers-per-worker, --max-active-volumes-per-worker
      • A possibly placement strategy chain to better balance workloads across workers could be [limit-max-containers, limit-max-volumes, volume-locality, fewest-build-containers]
        • This strategy chain first filters out workers that already have too many containers/volumes, then chooses all the workers with the most inputs already present locally, breaking ties by preferring the worker with fewer containers
      • Note: workers are not guaranteed to never exceed the maximum specified limits
    • go-concourse surfaces error messages on saving pipelines (#6222) @andy-paine :link:

      • where fly set-pipeline would simply print forbidden when the underlying API call returned a 403 status, now the body of the response will be printed. In particular, errors originating from OPA policy check rejections will be printed.
    • Don't enforce timeouts during image fetching (#6237) @vito :link:

    • Ignore paused jobs when displaying pipeline status in the UI (#6270) @chenbh :link:

      • The UI will no longer consider paused jobs when figuring out the overall status of a pipeline
    • Skip checking put-only resources (#6281) @evanchaoli :link:

      • An optimization which should lower the resource checking load on some instances: instead of checking all resources, only resources which are actually used as inputs will be checked. This feature was released in 6.0.0 and reverted in 6.6.0 because of its side effects. Now after resolving those side effects, it's back.
      • The --enable-skip-checking-not-in-use-resources flag has been removed as it is no longer needed.
    • fly set-pipeline prints pipeline name and instance vars (#6300) @aoldershaw :link:

    • Remove legacy logic for dealing with resource versions that have a check order of zero (#6323) @clarafu :link:

      • Includes a migration that will delete any versions with a check order of 0. This should not affect anything because versions with a check order of 0 are invalid versions.
      • Should speed up some queries that had legacy logic with filtering on versions with a check order of 0.
    • fly: Add fish auto complete (#6329) @Sasasu :link:

      • fly: add autocomplete for fish.
    • start containerd with low oom_score (#6330) @muntac :link:

      • It is recommended that containerd be started with an oom_score of -999. We want it to be at the level of other system daemons. This is so that containerd never runs into an out of memory state before the containers it's managing are cleaned up. At the same time it should not be unkillable.
    • Give worker registration its own database connection pool (#6332) @taylorsilva :link:

      • Give the worker registration endpoint its own database connection pool to avoid the situation where the API connection pool is maxed out and workers fail to register and stall
    • Allow underscore in identifiers (#6338) @aoldershaw :link:

    • Support for mTLS (#6355) @nickhyoti :link:

      • Added support for mTLS between Concourse and a reverse proxy that may be in front of Concourse
    • Allow configuring login and query timeouts for Vault (#6362) @evanchaoli :link:

      • These timeouts can be configured using CONCOURSE_VAULT_LOGIN_TIMEOUT and CONCOURSE_VAULT_QUERY_TIMEOUT respectively
      • The new default login timeout is 60s
    • Expose username of who manually triggered build to build metadata. (#6369) @evanchaoli :link:

      • fly builds has a new column created by that shows a user ID if a build is triggered manually.

      • A new build metadata BUILD_CREATED_BY may be exposed to resource. It is not exposed by default; you need to turn it by add expose_build_created_by when defining a resource:

        resources:
        - name: some-resource
          type: some-type
          expose_build_created_by: true
          source:
            ...
        
      • As different authentication connectors populate different claims, a new concourse web CLI option --concourse-display-user-id-per-connector is added that allow cluster administrator to configure which claims field should be consider as unique user id

        • Values of this option should be in format <connector>:<fieldname>
          • connector is one of: ldap, github, cf, bitbucket-cloud, gitlab, microsoft, oauth, oidc or saml
          • fieldname is one of:
            • user_id mapping to claims' user id field
            • name mapping to claims' username field
            • username mapping to claims' preferred username field
            • email mapping to claims' email field
    • Allow disabling resource checking for individual resources (#6386) @taylorsilva :link:

      • Automatic resource checking for individual resources can be disabled by setting check_every: never in a resource's definition
    • db: lidar checks put-only resources with failed checks (#6412) @taylorsilva :link:

      • Lidar now checks any put-only resources that ran a check which failed.
    • Add a flag to migrate to the latest db version (#6426) @taylorsilva :link:

      • add a --migrate-to-latest-version flag to the migrate command. This flag has concourse perform database migrations to the latest database version.
      • the concourse web command will still automatically migrate the database
    • Enhance search bar filtering and allow filtering by instance group (#6433) @aoldershaw :link:

      • Allow filtering by exact match on the dashboard by quoting search terms
      • Allow applying multiple search filters simultaneously (e.g. team:"main" status:paused)
      • Make search suggestions more intelligent
    • Add more tooltips for action buttons (#6453) @aoldershaw :link:

      • Many buttons in the UI now have a tooltip on hover to indicate what they do
    • Bump BaggageClaim to v1.10.0 (#6500) @vito :link:

      • Windows workers will now shell out to the much faster robocopy executable for copying local files. This should dramatically improve performance for Windows tasks which utilize caches: for caching a bunch of tiny files.
    • metrics: make tasks_wait_duration histogram record up to 1h (#6506) @marco-m-pix4d :link:

    • Removes unnecessary indexes from build events tables (#6522) @clarafu :link:

    • Allow @ in vars path (#6129) @xtremerui :link:

    🐞 Bug Fixes

    • fly pin-resource requires a version if the resource is unpinned (#6095) @jamieklassen :link:

      • Previously, you could run the command on an unpinned resource without passing a version -- it would run and succeed, but do nothing. Now the command will fail and print an error message.
    • Fix pipeline cards being rendered off-screen when sidebar was open (#6102) @aoldershaw :link:

      • Fixes occasional bug where pipelines would be rendered off-screen after a refresh on the dashboard
    • Fix quoting for var subkeys (#6108) @vixus0 :link:

      • Fix interpolation of quoted variable fields containing special characters.
    • Prevent set_pipeline runtime error (#6116) @mdb :link:

      • set_pipeline of a YML pipeline configuration file with no jobs: or resources: no longer causes a runtime error: invalid memory address or nil pointer dereference.
    • Use default uid:gid if passwd file does not exist and username is "root" (#6142) @chenbh :link:

      • The containerd runtime will now default to uid:gid 0:0 if username is "root" but /etc/passwd file does not exist
      • This matches the behaviour of the default guardian backend
    • Preserve whitespace within build output (#6157) @clarafu :link:

      • In v6.6.0, whitespace was collapsed in order to fix a bug with horizontal scrolling in the build output. This change will preserve all whitespace while also keeping the horizontal scrolling fix.
    • Prevent retrying on worker error when build is aborted (#6197) @evanchaoli :link:

      • Fixed a endless build retry bug
    • Limit configured by limit-active-tasks is not respected and more tasks can land on a worker (#6216) @aliculPix4D :link:

    • Remove any existing guardian assets (#6257) @taylorsilva :link:

      • The worker will now clear out any existing Guardian assets on start-up (/var/gdn/assets)
      • This fixes in-place upgrade scenarios where guardian was using old versions of runc
    • atc: abort a rerun build if input version gone (#6265) @xtremerui :link:

      • A rerun build will be aborted automatically if required version of any input is not available.
    • set-pipeline prompted unpause-pipeline command should have --team option. (#6336) @evanchaoli :link:

      • Fixed a bug of fly set-pipeline where --team option was missing in the prompted unpause-pipeline command.
    • Fix mount issues on containerd (#6348) @muntac :link:

      • Set the appropriate permissions for mounts in privileged containers.
      • Use the Linux default size for /dev/shm (shared memory) mount.
    • Bump baggageclaim to 1.9.1 to fix deeply-nested volumes with overlay driver (#6393) @vito :link:

      • This was partially fixed by #5961, but that original fix did not solve the problem in all cases
    • Ensure task, set_pipeline, load_var steps have names (#6410) @taylorsilva :link:

      • Return an error when no identifier is provided for task, set_pipeline, and load_var steps
    • add lock for concourse migrate to latest version cmd (#6510) @xtremerui :link:

    🤷 Miscellaneous

    • Apply bigint migrations to build_events partitions and read from old/new columns instead (#6305) @vito :link:

      • Rather than migrating the build_events table's build_id column to bigint, which we found to be too slow in large deployments, this PR adds a new bigint column to the build_events table that is populated at runtime
      • When querying for build events, we consider both the old and new column, since builds run prior to the upgrade to 7.0.0 will only have the old column set
    • Migrate build_id references to bigint (#6203) @vito :link:

      • This migration can be quite slow if you have a ton of builds, meaning web nodes may take a while to start upon upgrading.
      • This does not migrate the build_events table - that is handled in #6305
    • Update k8s-topgun for Helm v3 (#6034) @xtreme-vikram-yadav :link:

    • Refactor RunState to have ownership over build vars (#6082) @aoldershaw :link:

    • Switch back to upstream go-flags (#6096) @jamieklassen :link:

    • Fix fly integration tests on windows (#6099) @aoldershaw :link:

    • Add an example for the release note section in the pr template (#6109) @clarafu :link:

    • Add DeepSource config (#6110) @vito :link:

    • Emit start/finish metrics from check step (#6119) @vito :link:

    • Cleanup k8s topgun releases if failure occurs outside of It block (#6131) @chenbh :link:

    • Convert a few failing TopGun tests to Testflight (#6136) @vito :link:

    • Use custom types for CPU/Memory limits (#6143) @aoldershaw :link:

    • Minor refactoring around Variables (#6152) @aoldershaw :link:

    • Introduce dbtest package for higher-level test setup (#6156) @vito :link:

    • k8s topgun: fix panic (#6167) @chenbh :link:

    • Rename engine/builder types, merge into engine/ package (#6174) @vito :link:

    • Use dot notation in instanced pipelines API (#6177) @zoetian :link:

    • Respect tags when fetching images, send public plans in fetching events (#6184) @vito :link:

    • Fix topgun/k8s tests (#6185) @xtreme-sameer-vohra :link:

    • Fix check container placement, and only use check sessions for pipeline resource checks (#6189) @vito :link:

    • Update last check end time on check failure/error (#6192) @vito :link:

    • Bump dex module to v0.2.0 (#6195) @xtremerui :link:

      • Concourse uses a fork of Dex as its auth module. This Dex fork had not being synced up with upstream since v2.16.0. Now it tracks the latest v2.25.0. There are lots of improvements and bug fixes. Also some new connectors are available (Google, OpenShift, Atlassiancrowd etc,), we will evaluate and support them in future releases. An issue is created for tracking https://github.com/concourse/concourse/issues/6194.
    • Determine across step's max_in_flight at runtime (#6200) @aoldershaw :link:

    • Fix pipeline UI non-trigger input edges showing up as trigger (#6202) @vito :link:

    • topgun: use busybox for http proxy... for now (#6204) @vito :link:

    • Fix race condition with check build creation + starting (#6205) @vito :link:

    • Clear build events from previous resource/resource type check (#6211) @aoldershaw :link:

    • fast forward release branch (#6212) @chenbh :link:

    • Use proper types for jobs and resources on pipeline page (#6214) @aoldershaw :link:

    • Acquire lock on builds table in build_id migrations (#6219) @aoldershaw :link:

    • Revert "migration: acquire lock on builds table in build_id migrations" (#6220) @aoldershaw :link:

    • Use proper types for jobs and resources on pipeline page (#6221) @aoldershaw :link:

    • Use base resource type defaults in get/put steps (#6224) @aoldershaw :link:

      • This functionality already exists in v6.7.0+
    • [topgun/k8s] Stop leaking namespaces in test env (#6227) @taylorsilva :link:

    • [release/6.7.x] use k8s/client-go v11.0 for topgun (#6232) @chenbh :link:

    • Check step only acquires lock for periodic pipeline resource checks (#6235) @vito :link:

    • Fix up test data race for build tracker (#6254) @vito :link:

    • Add docker-compose overrides for SAML, LDAP, OAuth, and OIDC (#6262) @chenbh :link:

    • fly: give more leeway for slow test (#6264) @aoldershaw :link:

    • [topgun] skip failing topgun/k8s test (#6287) @taylorsilva :link:

    • Optimize fly tests (#6299) @muntac :link:

    • fly intercept falls back to sh when bash is missing (containerd runtime) (#6304) @aoldershaw :link:

    • add yarn install step to web ui instructions (#6313) @muntac :link:

    • Avoid recompiling fly in tests (#6317) @vito :link:

    • Fix 'fly sync' Windows tests (#6320) @vito :link:

    • fly rename-pipeline can rename an entire instance group (#6321) @aoldershaw :link:

    • Merge v6.7.2 into master [skip-migrations-check] (#6328) @vito :link:

    • limit-active-tasks strategy waits for a worker to be available (#6359) @taylorsilva :link:

      • This is the current behavior of limit-active-tasks, but it was broken during development. It does not impact a released version of concourse
    • Bump dex to patch an XML vulnerability (#6370) @taylorsilva :link:

      • Bump Dex to 2.27.0 which fixes a vulnerability in the go XML library
      • Concourse v6.7.3+ also has this patch applied
    • Refactor worker selection to facilitate adding multiple worker runtimes (#6387) @aoldershaw :link:

    • Deterministic ordering of ?vars params for instanced pipelines API (#6392) @aoldershaw :link:

    • build(deps): bump ini from 1.3.5 to 1.3.8 in /web/wats (#6394) @dependabot :link:

    • build(deps): bump ini from 1.3.5 to 1.3.8 (#6395) @dependabot :link:

    • Fix build finished metric for prometheus (#6401) @taylorsilva :link:

      • This doesn't affect any released version of Concourse, but the bug was introduced in a PR during development
    • Show instance vars in set_pipeline step header (#6409) @aoldershaw :link:

    • Fix archived pipeline check on the resource/job/build page for an instanced pipeline (#6414) @aoldershaw :link:

    • docker: add build arg for base image (#6415) @aoldershaw :link:

    • Fix groups with OIDC connector (#6436) @konstl000 :link:

      • Adds an --oidc-disable-groups flag that disables fetching groups claims from an upstream OIDC provider. By default, the groups claim is fetched (as with previous version of Concourse)
      • This was fixed in 6.7.4 as part of #6448.
    • make it clear on oidc scopes configuration (#6443) @xtremerui :link:

    • Remove --force in k8s-topgun test (#6449) @xtremerui :link:

    • Optimize fly windows tests (#6450) @aoldershaw :link:

    • introduce new integration test suite (#6479) @vito :link:

    • Skip Vault tests in Topgun (#6481) @aoldershaw :link:

    • move pkged.go to cmd/concourse/ (#6482) @vito :link:

    • runtime: add test coverage for container.Stop() (#6483) @muntac :link:

    • hide "group:" dropdown suggestion in search (#6487) @aoldershaw :link:

    • Optimize postgres runner for db tests (#6489) @aoldershaw :link:

    • Ignore archived pipelines for instance group count in top bar (#6491) @aoldershaw :link:

    • rename OIDC skip email verified flag (#6497) @aoldershaw :link:

    • Back-port integration test suite (#6499) @aoldershaw :link:

    • worker/runtime: remove no-op device rule (#6507) @muntac :link:

    • Optimize check deletion (#6511) @aoldershaw :link:

    • Add index and mini refactor to the check lifecycle query (#6517) @clarafu :link:

    📦 Bundled resource types

    Source code(tar.gz)
    Source code(zip)
    concourse-7.0.0-darwin-amd64.tgz(108.17 MB)
    concourse-7.0.0-darwin-amd64.tgz.sha1(75 bytes)
    concourse-7.0.0-linux-amd64.tgz(710.97 MB)
    concourse-7.0.0-linux-amd64.tgz.sha1(74 bytes)
    concourse-7.0.0-windows-amd64.zip(103.56 MB)
    concourse-7.0.0-windows-amd64.zip.sha1(76 bytes)
    fly-7.0.0-darwin-amd64.tgz(23.78 MB)
    fly-7.0.0-darwin-amd64.tgz.sha1(69 bytes)
    fly-7.0.0-linux-amd64.tgz(23.92 MB)
    fly-7.0.0-linux-amd64.tgz.sha1(68 bytes)
    fly-7.0.0-windows-amd64.zip(24.02 MB)
    fly-7.0.0-windows-amd64.zip.sha1(70 bytes)
  • v6.7.5(Feb 10, 2021)

    🐞 Bug Fixes

    • backport pkger fix to 6.7.x (#6480) @vito :link:

    • Backport https://github.com/concourse/concourse/pull/6478 to 6.7.x branch (#6496) @kirillbilchenko :link:

      • Some OIDC providers don't include the email_verified claim, which causes a validation error by default
      • To support these providers, you can set CONCOURSE_OIDC_SKIP_EMAIL_VERIFIED_VALIDATION to true

    🤷 Miscellaneous

    • Back-port integration test suite (#6499) @aoldershaw :link:

    📦 Bundled resource types

    Source code(tar.gz)
    Source code(zip)
    concourse-6.7.5-darwin-amd64.tgz(93.65 MB)
    concourse-6.7.5-darwin-amd64.tgz.sha1(75 bytes)
    concourse-6.7.5-linux-amd64.tgz(799.50 MB)
    concourse-6.7.5-linux-amd64.tgz.sha1(74 bytes)
    concourse-6.7.5-windows-amd64.zip(89.45 MB)
    concourse-6.7.5-windows-amd64.zip.sha1(76 bytes)
    fly-6.7.5-darwin-amd64.tgz(20.29 MB)
    fly-6.7.5-darwin-amd64.tgz.sha1(69 bytes)
    fly-6.7.5-linux-amd64.tgz(20.40 MB)
    fly-6.7.5-linux-amd64.tgz.sha1(68 bytes)
    fly-6.7.5-windows-amd64.zip(20.49 MB)
    fly-6.7.5-windows-amd64.zip.sha1(70 bytes)
  • v6.7.4(Jan 26, 2021)

    This patch is focused on fixing some bugs that came from bumping dex in 6.7.3. If you were having auth issues after upgrading to 6.7.3 try this patch!

    ✈️ Features

    • Backport #6362 to 6.7.x: handle slow Vault (#6413) @evanchaoli :link:
      Enhanced var_sources to handle slow Vault, like Vault login might take longer than 5 seconds.

    🐞 Bug Fixes

    • Add team groups to Dex response for Bitbucket connector (#6442) @aoldershaw :link:

    • Fix OIDC connector not fetching groups claim (#6448) @xtremerui :link:
      Fixed a regression that introduced in 6.7.3 that OIDC connector by default not fetching groups claim. Now OIDC connector always fetches groups claim unless --oidc-disable-groups flag is set. Backport of https://github.com/concourse/concourse/pull/6436.

    • Fix an ATC crash caused by parallel load_var steps (#6457) @evanchaoli :link:

      • When multiple load_var steps were running in parallel, there was the risk of the ATC crashing due to concurrent map writes

    🤷 Miscellaneous

    • Optimize fly windows tests (#6450) @aoldershaw :link:

    📦 Bundled resource types

    Source code(tar.gz)
    Source code(zip)
    concourse-6.7.4-darwin-amd64.tgz(94.46 MB)
    concourse-6.7.4-darwin-amd64.tgz.sha1(75 bytes)
    concourse-6.7.4-linux-amd64.tgz(800.29 MB)
    concourse-6.7.4-linux-amd64.tgz.sha1(74 bytes)
    concourse-6.7.4-windows-amd64.zip(92.07 MB)
    concourse-6.7.4-windows-amd64.zip.sha1(76 bytes)
    fly-6.7.4-darwin-amd64.tgz(20.56 MB)
    fly-6.7.4-darwin-amd64.tgz.sha1(69 bytes)
    fly-6.7.4-linux-amd64.tgz(20.67 MB)
    fly-6.7.4-linux-amd64.tgz.sha1(68 bytes)
    fly-6.7.4-windows-amd64.zip(20.77 MB)
    fly-6.7.4-windows-amd64.zip.sha1(70 bytes)
  • v6.7.3(Jan 12, 2021)

    🚨 Breaking

    • [6.7.x] Bump dex to 2.27.0 (#6371) @taylorsilva :link:
      • Bump Dex to 2.27.0 which fixes a vulnerability in the go XML library
      • This is only a breaking change for the OIDC connector when the downstream provider returns a preferred_username claim
        • Previously, the preferred_username claim would be ignored in favor of the --oidc-user-name-key concourse auth flag.
        • Now, the preferred_username claim takes precedence so its value will be used as concourse OIDC username.

    ✈️ Features

    • Allow underscore in identifiers (#6389) @aoldershaw :link:

    🐞 Bug Fixes

    • Fix auth bug (#6396) @evanchaoli :link:
      Fix an authorization bug, when a user has multiple roles in a team, then it may randomly hit "forbidden" error. Backport of #6368.

    • Add missing --team to fly set-pipeline: (#6406) @evanchaoli :link:
      Fixed a bug of fly set-pipeline where --team option was missing in the prompted unpause pipeline command. Backport of #6336.

    Source code(tar.gz)
    Source code(zip)
    concourse-6.7.3-darwin-amd64.tgz(94.41 MB)
    concourse-6.7.3-darwin-amd64.tgz.sha1(75 bytes)
    concourse-6.7.3-linux-amd64.tgz(804.89 MB)
    concourse-6.7.3-linux-amd64.tgz.sha1(74 bytes)
    concourse-6.7.3-windows-amd64.zip(91.70 MB)
    concourse-6.7.3-windows-amd64.zip.sha1(76 bytes)
    fly-6.7.3-darwin-amd64.tgz(20.53 MB)
    fly-6.7.3-darwin-amd64.tgz.sha1(69 bytes)
    fly-6.7.3-linux-amd64.tgz(20.67 MB)
    fly-6.7.3-linux-amd64.tgz.sha1(68 bytes)
    fly-6.7.3-windows-amd64.zip(20.76 MB)
    fly-6.7.3-windows-amd64.zip.sha1(70 bytes)
  • v6.7.2(Nov 30, 2020)

    This release focuses on optimizations and bug fixes.

    ✈️ Features

    • Optionally skip resource checking for put-only resources. (#6271) @evanchaoli :link:
      Resource checking for put resources can be optionally turned off by using the feature flag CONCOURSE_ENABLE_SKIP_CHECKING_NOT_IN_USE_RESOURCES on the web command. Only resources which are used as inputs to a job will be checked as a result. This can lower the resource checking load on some instances. This feature was originally added in 6.0.0 and reverted in 6.6.0 because of two side effects: 1) put-only resources will no longer show version history in the UI, and 2) custom resource types of put-only resources will no longer be automatically checked. Please note that these side effects still exist at the moment.

    • Add index to improve pipeline and build deletion (#6273) @vito :link:
      Pipeline deletion had become slow and even caused some deadlocks in the database. This migration fixes those issues.

    • Ensure pipelines contain at least one job (#6310) @taylorsilva :link:
      Pipelines are now validated to ensure that they contain at least one job. Pipeline configurations with no jobs will be rejected.

    🐞 Bug Fixes

    • Remove any existing guardian assets on worker startup (#6257) @taylorsilva :link:
      The guardian runtime executable contains some other executables as dependencies, such as runc. Interestingly, it writes them to disk (/var/gdn/assets) at startup, and proceeds to run them from there. If the dependencies already exist from a previous version of guardian then they're not overwritten preventing the updated dependencies from being used. The worker will now clear out any preexisting guardian assets every time it starts. This fixes in-place upgrade scenarios on BOSH deployments where guardian kept using older versions of runc.

    • Abort a rerun build if input version is gone (#6265) @xtremerui :link:
      Sometimes a rerun of a build can get stuck in the pending state forever. This can happen if the resource version used for the original build no longer exists. For example, an older commit disappears when a user force pushes to a git repository. Builds will now abort instead of getting stuck when the resource version no longer exists.

    • Fix regression preventing the use of nested fields with fly set-pipeline --var (#6280) @aoldershaw :link:

      • A regression was introduced in 6.5.0 that prevented the use of nested fields when setting a pipeline variable via fly set-pipeline --var
        • For instance, pre 6.5.0, fly set-pipeline --var foo.bar=123 --var foo.baz=456 would create the variable foo with value {bar: 123, baz: 456} (that can be referenced in the pipeline config as ((foo.bar)), ((foo.baz)))
        • In 6.5.x/6.6.x, the same command would create variables "foo.bar" = 123 and "foo.baz" = 456 (that would have to be referenced in the pipeline config as (("foo.bar")) and (("foo.baz")), respectively)
        • If you want to set a variable with a . in it, you can now quote the flag: e.g. fly set-pipeline --var '"foo.bar"=123' (note that this requires quoting the entire flag in '...' to avoid shell expansion)
    • Only increment checks-enqueued when a check is created. (#6282) @evanchaoli :link:
      There was a metrics bug where checks-enqueued would get incremented even if a check already exists. This gave it a higher value than checks that have just been created.

    • Prevent set_pipeline runtime error (#6307) @evanchaoli :link:
      set_pipeline of a YML pipeline configuration file with no jobs: or resources: no longer causes a runtime error: invalid memory address or nil pointer dereference. This is a backport #6116.

    🤷 Miscellaneous

    • Optimize fly tests (#6299) @muntac :link:
    Source code(tar.gz)
    Source code(zip)
    concourse-6.7.2-darwin-amd64.tgz(91.90 MB)
    concourse-6.7.2-darwin-amd64.tgz.sha1(75 bytes)
    concourse-6.7.2-linux-amd64.tgz(800.46 MB)
    concourse-6.7.2-linux-amd64.tgz.sha1(74 bytes)
    concourse-6.7.2-windows-amd64.zip(89.63 MB)
    concourse-6.7.2-windows-amd64.zip.sha1(76 bytes)
    fly-6.7.2-darwin-amd64.tgz(20.19 MB)
    fly-6.7.2-darwin-amd64.tgz.sha1(69 bytes)
    fly-6.7.2-linux-amd64.tgz(20.33 MB)
    fly-6.7.2-linux-amd64.tgz.sha1(68 bytes)
    fly-6.7.2-windows-amd64.zip(20.42 MB)
    fly-6.7.2-windows-amd64.zip.sha1(70 bytes)
  • v6.7.1(Nov 2, 2020)

    This release bumps the docker-image resource type to v1.5.1 which contains a fix for the HEAD => GET request flow.

    NOTE: the docker-image resource type does not support configuring credentials in registry_mirror. This issue is somewhat fundamental, as the the docker CLI which the resource type uses doesn't support it either. If your registry mirror requires credentials, we recommend using the registry-image resource type instead - it's much more efficient, and it will replace the docker-image resource type entirely once it's ready.

    Source code(tar.gz)
    Source code(zip)
    concourse-6.7.1-darwin-amd64.tgz(94.87 MB)
    concourse-6.7.1-darwin-amd64.tgz.sha1(75 bytes)
    concourse-6.7.1-linux-amd64.tgz(805.79 MB)
    concourse-6.7.1-linux-amd64.tgz.sha1(74 bytes)
    concourse-6.7.1-windows-amd64.zip(90.92 MB)
    concourse-6.7.1-windows-amd64.zip.sha1(76 bytes)
    fly-6.7.1-darwin-amd64.tgz(21.22 MB)
    fly-6.7.1-darwin-amd64.tgz.sha1(69 bytes)
    fly-6.7.1-linux-amd64.tgz(20.39 MB)
    fly-6.7.1-linux-amd64.tgz.sha1(68 bytes)
    fly-6.7.1-windows-amd64.zip(20.51 MB)
    fly-6.7.1-windows-amd64.zip.sha1(70 bytes)
  • v6.7.0(Oct 29, 2020)

    The primary focus of this release is to adapt to Docker Hub's upcoming rate limits for free users, which will take effect November 2.

    We recommend that anyone who uses images hosted on Docker Hub - either without authentication or with a free account - to upgrade to this release, which includes the following:

    • registry-image resource type v0.14.0 and docker-image resource type v1.5.0
      • Both resource types now use a HEAD request rather than GET during the check operation so that they don't count towards the rate limit. This was shipped in v6.6.0, but registries which do not support HEAD broke - now they'll fall back on GET.
    • Ability to configure defaults for resource types (#6079).
      • The check fix is not enough in isolation - a large enough Concourse cluster might still run into rate limits when it comes time to fetch the image.
      • With resource type defaults, a cluster-wide pull-through cache may be configured by setting a default registry_mirror config for the registry-image resource type and the docker-image resource type. (Note that their configuration is slightly different.)

    More details follow!

    ✈️ Features

    • Allow configuring source "defaults" for resource types (#6079) @evanchaoli :link:
      • With this feature, a cluster admin may configure default source configuration for core resource types on the web node. For example, when the following file is specified to ATC --base-resource-type-defaults=brt_default.yml:

        registry-image:
          registry_mirror:
            host: 192.168.1.12:5000
        

        then all registry-image will pull images from the mirror 192.168.1.12:5000.

        At pipeline level, defaults can be defined with resource types, for example:

        resource_types:
        - name: rt-gitlab
          type: registry-image
          source:
            repository: <uri of a gitlab resource type>
          defaults:
            url: <gitlab url>
            project: <project-id>
        
        resources:
        - name: gitlab-mr
          type: rt-gitlab
          source:
            kind: MergeRequest
        
        - name: gitlab-release
          type: rt-gitlab
          source:
            kind: Release
        

        In this sample, when defines the gitlab resource-type, GitLab url and project-id are defined as defaults of the resource type, so that all resources of the type will inherit those defaults.

    🐞 Bug Fixes

    • containerd does not grant access to /dev/console (#6181) @jamieklassen :link:
      • If you are running concourse with the containerd backend inside a runc-managed process and your version of runc is v1.0.0-rc91 or above, creating privileged containers no longer fails with EPERM.
    Source code(tar.gz)
    Source code(zip)
    concourse-6.7.0-darwin-amd64.tgz(94.87 MB)
    concourse-6.7.0-darwin-amd64.tgz.sha1(75 bytes)
    concourse-6.7.0-linux-amd64.tgz(805.80 MB)
    concourse-6.7.0-linux-amd64.tgz.sha1(74 bytes)
    concourse-6.7.0-windows-amd64.zip(90.92 MB)
    concourse-6.7.0-windows-amd64.zip.sha1(76 bytes)
    fly-6.7.0-darwin-amd64.tgz(21.22 MB)
    fly-6.7.0-darwin-amd64.tgz.sha1(69 bytes)
    fly-6.7.0-linux-amd64.tgz(20.39 MB)
    fly-6.7.0-linux-amd64.tgz.sha1(68 bytes)
    fly-6.7.0-windows-amd64.zip(20.51 MB)
    fly-6.7.0-windows-amd64.zip.sha1(70 bytes)
  • v6.6.0(Oct 2, 2020)

    🚨 Breaking

    • The concourse worker process now depends, via gdn v1.19.16, on runc v1.0.0-rc91. There is a known issue with using BPM to manage newer versions of runc, which has been resolved in bpm-release v1.1.9. So if your concourse is deployed using BOSH, you will also need to use at least BPM 1.1.9. After upgrading, if you start to see build steps erroring with a message like:
      runc run: exit status 1: container_linux.go:349: starting container process caused "process_linux.go:439: container init caused \"process_linux.go:405: setting cgroup config for procHooks process caused \\\"failed to write \\\\\\\"c 5:1 rwm\\\\\\\" to \\\\\\\"/sys/fs/cgroup/devices/system.slice/concourse.service/garden/a206550f-f6dd-4609-4f13-0a11afd3fd93/devices.allow\\\\\\\": write /sys/fs/cgroup/devices/system.slice/concourse.service/garden/a206550f-f6dd-4609-4f13-0a11afd3fd93/devices.allow: operation not permitted\\\"\""
      

      then you probably need to upgrade BPM. Thanks @tlwr for investigating this!

    If you still see this issue it is because BOSH did not upgrade the assets under /var/gdn on the worker. Recreating the worker VMs using either bosh recreate, or the --recreate flag on bosh deploy will pull in the intended gdn assets.

    ✈️ Features

    • Allow rotating the encryption key via concourse migrate (#5980) @aoldershaw :link:

      • concourse migrate can be called with --old-encryption-key to rotate the database encryption key as a one-time operation
      • concourse web still accepts --old-encryption-key
      • You should stop any ATCs prior to running this command
    • Support SAML 2.0 as an auth backend (#5998) @adnankobir :link:

    • Use the configured resolv.conf for containerd (#6001) @YoussB :link:

    • set_pipeline step header indicates whether changes were applied (#6011) @andy-paine :link:

      • If a set_pipeline step made any changes, it will indicate by highlighting in yellow and displaying pipeline config changed message when hovered over the step.
    • Allow the fly http transport to use client certificates (#6017) @avanier :link:

      • Adds new --client-cert and --client-key flags to the fly login command. The provided client certificates will then be used by fly's http transport.
    • Add new default values to the Guardian flags network-pool and max-containers (#6031) @muntac :link:

    • Allow statx in containerd (#6045) @muntac :link:

      • Update containerd's seccomp profile to allow the statx system call. This lets basic commands like ls -l to be executed.
    • Enable secret caching for var_sources. (#6046) @evanchaoli :link:

    • Custom background image (#6053) @andy-paine :link:

      • Pipeline authors can now include a custom background_image under the display key in pipeline config e.g:
        display:
          background_image: https://avatars1.githubusercontent.com/u/7809479?s=400&v=4
        

    🐞 Bug Fixes

    • Return real JSON from fly get-team --json (#5996) @agurney :link:

      • The --json flag on fly get-team is meant to yield a structured JSON representation of the team data, including auth details, but instead just gave {}. Now it works as intended.
    • Admins can only login to teams that exist (#6021) @izabelacg :link:

      • Previously admins could log into any team, even if the team did not exist. Admins can still log into any team but now fly verifies that the team exists before saving the target to .flyrc.
    • Request schedule when cancelling a pending build (#6023) @xtremerui :link:

      • Fix a bug that a build can't be cancelled if it is in pending state because of unsatisfiable inputs
    • Enable fly validate-pipeline to accept --enable-across-step (#6027) @flavorjones :link:

      • Enable fly validate-pipeline to accept --enable-across-step and recognize across as a valid step.
    • Fix build reaper missing builds due to pagination (#6051) @chenbh :link:

      • Fixed the build reaper missing builds
      • Fixed pagination bugs on the resource version and job builds pages
    • Fix a bug where running fly execute fails in an environment when all workers are tagged. (#6059) @aledeganopix4d :link:

    • Fix horizontal scrolling on build page (#6083) @zoetian :link:

    • Only set Guardian flag default when flag not provided by user (#6087) @muntac :link:

      • Only pass garden the configured defaults within Concourse for the guardian flags max-containers and network-pool if it is not set through the garden config file, environment variables or flags.
    • Revert "skip resource check for put-only resources" (#5905) @chenbh :link:

      • While this was a useful optimization, it caused a regression where Concourse failed to detect newer versions (images) of custom resource types for put-only resources under certain circumstances

    🤷 No Impact

    • Deflake k8s topgun (#6030) @jamieklassen :link:

    • build(deps): bump yargs-parser from 13.1.1 to 13.1.2 (#6047) @dependabot :link:

    • Remind people they need JS to run the browser app (#6065) @steadysupply :link:

    • Use atc.TaskEnv type in task step (#6066) @vito :link:

    • Make --client-cert flag name consistent between fly login and fly sync (#6068) @aoldershaw :link:

    • Skip yarn benchmark until dependency is fixed (#6078) @clarafu :link:

    Source code(tar.gz)
    Source code(zip)
    concourse-6.6.0-darwin-amd64.tgz(94.87 MB)
    concourse-6.6.0-darwin-amd64.tgz.sha1(75 bytes)
    concourse-6.6.0-linux-amd64.tgz(808.33 MB)
    concourse-6.6.0-linux-amd64.tgz.sha1(74 bytes)
    concourse-6.6.0-windows-amd64.zip(90.91 MB)
    concourse-6.6.0-windows-amd64.zip.sha1(76 bytes)
    fly-6.6.0-darwin-amd64.tgz(21.22 MB)
    fly-6.6.0-darwin-amd64.tgz.sha1(69 bytes)
    fly-6.6.0-linux-amd64.tgz(20.40 MB)
    fly-6.6.0-linux-amd64.tgz.sha1(68 bytes)
    fly-6.6.0-windows-amd64.zip(20.51 MB)
    fly-6.6.0-windows-amd64.zip.sha1(70 bytes)
  • v6.5.0(Aug 21, 2020)

    🚨 Breaking

    • Generate opaque OAuth2 access tokens (#5897) @aoldershaw :link:

      • There were several issues that users encountered (particularly after v6.1.0) as a result of long access tokens. Concourse now generates much shorter access tokens rather than using the raw user data.
      • Users' last activity is now tracked on login rather than on every request. Updating the last activity on every request caused database problems at scale. Note: last activity is only relevant to fly active-users
      • This is only a breaking change for any custom automation built around Concourse that authenticates with the Concourse API
    • Fix Gitlab auth to reference a user's username instead of their full name (#5925) @chenbh :link:

      • If a team was configured for Gitlab auth with the --gitlab-user flag, you must ensure the user referenced is a valid Gitlab username, rather than a user's full name. If not, you must reconfigure the team with fly set-team to reference the username. Teams configured with --gitlab-group are unaffected.
    • Add format: trim to load_var step and make it the default (#5894) @evanchaoli :link:

      • format: trim removes all trailing and leading whitespace from the input file
      • The prior behavior of keeping all whitespace can be used by specifying format: raw (see load_var.format)
    • Prefix containerd specific flags with CONCOURSE_CONTAINERD (#5911) @muntac :link:

      • This is only a breaking change if you were using the experimental containerd backend. The default guardian backend remains unaffected and is still configured with CONCOURSE_GARDEN environment variables

    ✈️ Features

    • Display favorite pipelines section at the top of the dashboard (#5922) @zoetian :link:

    • Pipelines can be favorited from the sidebar (#5860) @zoetian :link:

    • Pipelines can be favorited from the dashboard (#5904) @zoetian :link:

    • Pipelines can be favorited from the pipeline page (#5979) @zoetian :link:

    • Automatically archive abandoned pipelines (#5854) @taylorsilva :link:

      • An abandoned pipeline is one that was once set by a set_pipeline step but no longer is. See the set_pipeline docs for more information
      • The temporary feature flag --enable-archive-pipeline was removed as the archiving pipelines feature is complete
    • Add experimental across step for running build plans across a matrix of values (#5887) @aoldershaw :link:

      • This feature must be enabled using --enable-across-step as it is subject to change - don't be alarmed if your pipelines with across stop working in a future release!
      • There's no official documentation yet, but there are some examples of usage patterns in the RFC
    • Allow dot and colon in variable path (#5898) @xtremerui :link:

      • You can now interpolate variables with special characters . and : in the name by wrapping them in double quotes
      • e.g. (("some.secret".field1)) accesses field1 of the secret some.secret
    • Emit warnings for invalid identifiers (#5864) @mouellet :link:

      • A warning will be emitted for every identifier that doesn't match the validation rules described in the identifier schema
      • After 1 year, we will error when identifiers don't match the validation rules - so, we recommend adhering to the new validation as soon as possible!
    • Support set-pipeline: self for configuring current pipeline (#5737) @evanchaoli :link:

      • This feature is experimental, and may be removed a future version
    • Rerun builds with baggageclaim network errors (#5958) @kirillbilchenko :link:

      • The --enable-rerun-when-worker-disappears flag now supports rerunning builds after any network error from the ATC to the worker's baggageclaim. Such network errors are common when the worker disappears.
      • Builds will now be rerun when this flag is enabled and the failing step is a nested step (e.g. within an in_parallel)
    • Mount Btrfs loopback with discard option (#5916) @muntac :link:

      • This punches holes in the underlying loop file making it sparse, and will potentially result in better disk utilization
    • Speed up querying for unencrypted builds (#5902) @clarafu :link:

      • If your environment had a large number of builds and an encrypted database, you might have noticed your web node being slow to start up. An index was added to help speed up the querying of unencrypted builds which is run during the web startup.
    • Support reloading TSA worker keys via SIGHUP signal (#5652) @gaelL :link:

    • get/put/task steps now emit the selected worker to the build log (#5846) @evanchaoli :link:

      • The build log page and fly watch now display the worker name for get/put/task steps
    • Enhance TasksWaiting metric to include teamId, workerTags, and platform labels (#5981) @aledeganopix4d :link:

    • Add the token text to the fly_success page (#4951) @jvshahid :link:

    • TSA's garden client timeout can be configured using --tsa-garden-request-timeout (#5845) @xtreme-sameer-vohra :link:

    • Allow fly set-pipeline to take configuration from stdin (#5861) @evanchaoli :link:

      • The --config flag of the fly set-pipeline command now supports - for reading pipeline config from stdin
    • Add --team flag to fly pause-pipeline and fly hide-pipeline commands (#5917) @owenfarrell :link:

    • Add --team flag to fly destroy-pipeline command (#5924) @khng :link:

    • Always print warning after fly set-pipeline if pipeline is paused (#5883) @agurney :link:

    • Add flag --ignore-event-parsing-errors to fly watch to ignore event parsing errors when an unknown event type or version is encountered. (#5957) @xtreme-sameer-vohra :link:

    • Remove unnecessary updates to the resource's check_error value (#5990) @clarafu :link:

      • The query will only update the resource check error to NULL if it is not already NULL.
    • Support max container limit with containerd backend (#5836) @xtreme-sameer-vohra :link:

    🐞 Bug Fixes

    • Prevent potential database deadlock after pipeline deletion (#5987) @aoldershaw :link:

    • Allow usage of images from custom resource types in fly execute (#5866) @jvshahid :link:

    • Save job.disable_manual_trigger to the database (#5908) @jamieklassen :link:

      • Fixed the disable_manual_trigger: field on jobs -- since v6.0.0 it had no effect and jobs with this setting could actually still be manually triggered.
    • Return error when a step only contains modifiers (#5910) @taylorsilva :link:

    • Bump baggageclaim to v1.8.0 to fix deeply-nested volumes with overlay driver (#5961) @vito :link:

    🤷 No Impact

    • Edit pr template to include new release note generation process (#5903) @clarafu :link:

    • Fix flakey container sweeper test (#5923) @xtreme-vikram-yadav :link:

    • Elm tests use Data module for identifiers (#5928) @aoldershaw :link:

    • Remove ignored windows fly test case (#5946) @aoldershaw :link:

    • Remove private_plan from index (#5950) @izabelacg :link:

    • Prevent pipeline from getting GC'd in testflight (#5951) @aoldershaw :link:

    • Fly commands don't assume tokens are JWTs (#5955) @aoldershaw :link:

    • Use access token for Concourse API in topgun (#5965) @aoldershaw :link:

    • Deflake metrics tests (#5975) @jamieklassen :link:

    • Skip failing k8s topgun tests for containerd without a dns proxy or dns servers configured (#5976) @xtreme-sameer-vohra :link:

    • Fix go 1.15 int-to-string conversion warning in tests (#5983) @aoldershaw :link:

    • build(deps): bump lodash from 4.17.15 to 4.17.19 in /web/wats (#5890) @dependabot :link:

    • build(deps): bump elliptic from 6.5.2 to 6.5.3 (#5940) @dependabot :link:

    Source code(tar.gz)
    Source code(zip)
    concourse-6.5.0-darwin-amd64.tgz(95.37 MB)
    concourse-6.5.0-darwin-amd64.tgz.sha1(75 bytes)
    concourse-6.5.0-linux-amd64.tgz(798.23 MB)
    concourse-6.5.0-linux-amd64.tgz.sha1(74 bytes)
    concourse-6.5.0-windows-amd64.zip(92.75 MB)
    concourse-6.5.0-windows-amd64.zip.sha1(76 bytes)
    fly-6.5.0-darwin-amd64.tgz(21.06 MB)
    fly-6.5.0-darwin-amd64.tgz.sha1(69 bytes)
    fly-6.5.0-linux-amd64.tgz(20.25 MB)
    fly-6.5.0-linux-amd64.tgz.sha1(68 bytes)
    fly-6.5.0-windows-amd64.zip(21.33 MB)
    fly-6.5.0-windows-amd64.zip.sha1(70 bytes)
  • v6.4.1(Aug 4, 2020)

    :link: security

    • Fix Gitlab connector configuration using Full Name instead of Username
      • Any Concourse teams configured with Gitlab users may need to be updated. Previously a Gitlab users Full Name was used to add them to a Concourse team. Now the users Username in Gitlab is used by Concourse to verify team membership. If the Full Name and Username are the same then no change is necessary.
    Source code(tar.gz)
    Source code(zip)
    concourse-6.4.1-darwin-amd64.tgz(90.92 MB)
    concourse-6.4.1-darwin-amd64.tgz.sha1(75 bytes)
    concourse-6.4.1-linux-amd64.tgz(738.02 MB)
    concourse-6.4.1-linux-amd64.tgz.sha1(74 bytes)
    concourse-6.4.1-windows-amd64.zip(88.28 MB)
    concourse-6.4.1-windows-amd64.zip.sha1(76 bytes)
    fly-6.4.1-darwin-amd64.tgz(19.23 MB)
    fly-6.4.1-darwin-amd64.tgz.sha1(69 bytes)
    fly-6.4.1-linux-amd64.tgz(19.52 MB)
    fly-6.4.1-linux-amd64.tgz.sha1(68 bytes)
    fly-6.4.1-windows-amd64.zip(19.44 MB)
    fly-6.4.1-windows-amd64.zip.sha1(70 bytes)
Owner
Concourse
Continuous thing doer
Concourse
🦄🌈 YoyoGo is a simple, light and fast , dependency injection based micro-service framework written in Go.

???? YoyoGo is a simple, light and fast , dependency injection based micro-service framework written in Go. Support Nacos ,Consoul ,Etcd ,Eureka ,kubernetes.

YoyoFx 542 Jun 24, 2022
A microservice gateway developed based on golang.With a variety of plug-ins which can be expanded by itself, plug and play. what's more,it can quickly help enterprises manage API services and improve the stability and security of API services.

Goku API gateway is a microservice gateway developed based on golang. It can achieve the purposes of high-performance HTTP API forwarding, multi tenant management, API access control, etc. it has a powerful custom plug-in system, which can be expanded by itself, and can quickly help enterprises manage API services and improve the stability and security of API services.

Eolink 194 Jun 22, 2022
Rpcx-framework - An RPC microservices framework based on rpcx, simple and easy to use, ultra fast and efficient, powerful, service discovery, service governance, service layering, version control, routing label registration.

RPCX Framework An RPC microservices framework based on rpcx. Features: simple and easy to use, ultra fast and efficient, powerful, service discovery,

ZYallers 1 Jan 5, 2022
Design-based APIs and microservices in Go

Goa is a framework for building micro-services and APIs in Go using a unique design-first approach. Overview Goa takes a different approach to buildin

Goa 4.7k Jun 25, 2022
Generates Golang client and server based on OpenAPI2 (swagger) definitions

ExperienceOne Golang APIKit ExperienceOne Golang APIKit Overview Requirements Installation Usage Generate standard project structure Define the API wi

Experience One 139 May 31, 2022
Fast HTTP microservice written in Go for high-level image processing backed by bimg and libvips.

imaginary Fast HTTP microservice written in Go for high-level image processing backed by bimg and libvips. imaginary can be used as private or public

null 0 Nov 23, 2021
NewSQL distributed storage database based on micro service framework

QLite 是基于微服务的 NewSQL 型数据库系统,与传统的一体化数据库不同,该系统将本该内置的多种数据结构(STL)拆分成多个服务模块,每个模块都是独立的一个节点,每个节点都与其主网关进行连接,从而形成分布式存储结构。

null 36 Jun 19, 2022
Application tracing system for Go, based on Google's Dapper.

appdash (view on Sourcegraph) Appdash is an application tracing system for Go, based on Google's Dapper and Twitter's Zipkin. Appdash allows you to tr

Sourcegraph 1.7k Jun 22, 2022
This example showcases an event-sourced CQRS system based on github.com/romshark/eventlog

Eventlog Example This example is showcasing an eventually consistent, fault-tolerant, event sourced system following the CQRS (Command-Query-Responsib

Roman Sharkov 3 Mar 13, 2022
A banking microservice based on hexagonal architecure.

1. Banking Microservice Design Decisions 1. Hexagonal Architecture. 2. REST Api. 3. Dependency Injection. 4. Database Transactions. 5. Structured Erro

Ashef Habib Tishad 1 Feb 18, 2022
Nano - Lightweight, facility, high performance golang based game server framework

Nano Nano is an easy to use, fast, lightweight game server networking library fo

Lonng 2k Jun 21, 2022
generates avatars based on a user's name

Gradient Avatar Service - GAS Gradient Avatar Service is a service that generates avatars based on a user's name. GAS is inspired by Vercel's user ava

Muhammed Nazeem 0 Jan 16, 2022
Tiny service health dashboard written in Go

GreenWall Status: Done (waiting for feedback) Description GreenWall is a tiny service health dashboard written in Go (with frontend prepared in Bootst

Marcin Tojek 293 May 26, 2022
User management microservice written in Go with Postgres

user-registration-service-go Simple user registration microservice written in Go with Postgres database. Uses clean architecture to accept requests fr

Rajesh Kumar 16 Jan 18, 2022
Gorpsy. Remote procedure call for local linux hosts written in Go.

GoRPC Gorpsy. Remote procedure call for local linux hosts written in Go. GoRPC is built with the filesystem in mind.

Kris Nóva 4 Feb 25, 2022
A simple microservice written in Go

Go Microservice A simple microservice written in Go. Structure ├── cmd │   └── postservice ├── internal │   └── apps │   ├── authservice │   │

Juan Christian 3 Oct 20, 2021
GoMicroservices - RESTful microservices written in Go standard library

RESTful microservices written in Go standard library. Folder product corresponds

Emrah 1 Jan 21, 2022
Realworld implementation written with Go using go-kit!

This project is an implementation of the RealWorld project using Go utilizing go-kit as an application framework. The project heavily utilizes Docker

Joey McKenzie 8 Jun 7, 2022
Microservice Boilerplate for Golang with gRPC and RESTful API. Multiple database and client supported

Go Microservice Starter A boilerplate for flexible Go microservice. Table of contents Features Installation Todo List Folder Structures Features: Mult

Ahmad Saugi 11 May 27, 2022